Hide Table of Contents

Varying a Fin's Direction

You can position two fins in varying directions, such as on opposite sides of a corner.

If there are more than two fins, specify a direction for the first fin. The software equally spaces the remaining fins from the direction of the first fin.

To align the fins along the adjoining sides of a corner:

  1. Select a face or edge adjoining the corner for the first fin.

    fin1

    The face is listed in Select a direction vector.

  2. Set Number of Fins to 2.
  3. Clear Equally Spaced.

    Another option for Select a direction vector appears.

  4. Select a face or edge on the opposite side of the corner to position the second fin.

    fin2

  5. Click PM_OK.gif.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Varying a Fin's Direction
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.29