İçindekiler'i Gizle

Analysis Results PropertyManager

Analysis Parameters

Use the analysis parameters to set the evaluation criteria and precision of the results.

Orientation tolerances Includes geometric orientation tolerances (angularity, parallelism, and perpendicularity), and angular plus and minus location tolerances in the evaluation of the worst case conditions. The results are automatically recalculated each time the option is selected or cleared. Examples: Using Orientation Tolerances
Normal to origin feature Updates the measurement vector to be normal to the plane or axis of the Measurement PropertyManager's Measure From feature. The results are automatically recalculated each time the option is selected or cleared. Examples: Using Normal to Origin Feature
Float fasteners and pins Uses the clearances between the holes and fasteners to increase the worst-case minimum and maximum result. Each part can move in an amount equal to the radial distance between the hole and fastener. Examples: Fixed and Floating Fastener Assemblies
Tolerance precision Sets the precision of the results given under Analysis Summary. You can set the precision before or after the results are computed. The results are not recalculated.
Recalculate Runs the analysis. Click Recalculate after changing the tolerance values of one or more contributing tolerances under Min/Max Contributors.
Recalculate is unavailable unless you change tolerance values of the contributing tolerances.

Analysis Summary

The analysis summary displays the results, which you can export.

Results Lists these items:
  • The nominal value of the measurement
  • The minimum and maximum worst case conditions
  • The root sum squares (RSS) minimum and maximum worst case conditions
Export Results Click to save the results to Excel, XML, or HTML.

Analysis Data and Display

The analysis data and display lists the contributors and manages the display in the graphics area. You can set the data and display for the minimum or maximum worst case condition.

Min/Max Contributors The contributor list states each contributing feature and its percent contribution on the worst case minimum or maximum condition, based on the difference between the measurement nominal value and worst case result.

For example, if the nominal value is 10 mm and the worst case maximum result is 11, the feature contribution is 10% if it consumes 0.1 of the 1 mm tolerance stack.

Below each feature, the list of dimensions and tolerances that cause the contribution are displayed. When you select an item in the list, the dimension or tolerance appears in the graphics area. See Graphics Area Display of TolAnalyst Results. Double-click an item in the list to open the Dimension Tolerance or Change Geometric Tolerance dialog box where you can modify the tolerance values. With these two dialogs, you are editing the part. These are not temporary overrides to values. After modifying tolerance values, click Recalculate to compute new results.



Bu başlık hakkında geribildirimde bulunun

SOLIDWORKS; dokümantasyonun sunumu, doğruluğu ve bütünlüğü hakkında geribildiriminizi almaktan memnuniyet duyar. Bu başlık ile ilgili yorum ve önerilerinizi, aşağıdaki formu kullanarak doğrudan dokümantasyon takımımıza yollayın. Dokümantasyon takımı teknik destek sorularına yanıt veremez. Teknik destek ile ilgili bilgiler için buraya tıklayın.

* Gerekli

 
*Email:  
Konu:   Yardım Başlıkları Hakkında Geribildirim
Sayfa:   Analysis Results PropertyManager
*Yorum:  
*   Kişisel Bilgilerimin Dassault Systèmes tarafından kullanılacağının belirtildiği gizlilik politikasını okuduğumu ve kabul ettiğimi onaylıyorum

Yazdırma Başlığı

Yazdırılacak içeriğin kapsamını seçin:

x

Internet Explorer 7'den daha eski bir tarayıcı sürümünü kullandığınızı tespit ettik. Optimize edilmiş görünüm için tarayıcınızı Internet Explorer 7 veya daha yenisine yükseltmenizi öneririz.

 Bu mesajı bir daha asla gösterme
x

Web Yardım İçerik Sürümü: SOLIDWORKS 2013 SP05

SOLIDWORKS içindeki Web yardımını devre dışı bırakmak ve onun yerine yerel yardımı kullanmak için Yardım > SOLIDWORKS Web Yardımını Kullan öğelerine tıklayın.

Web yardımı arabirimi ve araması ile ilgili karşılaştığınız sorunları lütfen yerel destek temsilcinize bildirin. Yardım başlıkları hakkında ayrı ayrı geri bildirimde bulunmak için ilgili başlığın sayfasından "Bu başlık hakkında geribildirim" bağlantısına tıklayın.