Hide Table of Contents

Costing Template Editor for Sheet Metal Parts

You can create and edit costing templates for sheet metal parts or bodies from the Costing Template Editor.

You can specify rates and costs for the procedures required to manufacture a sheet metal part or body in the sheet metal template. You can include customized information in the template, such as material cost and thicknesses, cost of manufacturing, and manufacturing setup costs.

You can determine how manufacturing operations affect the cost of your design. For example, you can set up templates for vendors that use different manufacturing operations.

To display the Costing Template Editor:
  • Click Costing tool_costing_tools.gif (Tools toolbar). In the Costing Task Pane, under Costing Template, click Launch Template Editor.
To display the Costing Template Editor for the sheet metal bodies in a multibody part:
  1. Click Costing tool_costing_tools.gif (Tools toolbar).
  2. In the Costing Task Pane, under Costing Templates, click Launch Template Editor.
  3. In the Costing Template Editor, next to Sheet metal template, click View.

You can specify the file location for Costing templates in Tools > Options > System Options > File Locations . In Show folders for, select Costing templates to add or delete a location. The default Costing template folder is install_dir\lang\language\Costing templates.

Contents

  • General

    Use the General screen in the Costing Template Editor to set the units and currency options.

  • Material

    Use the Material screen in the Costing Template Editor to set the materials you need to manufacture the sheet metal part.

  • Thickness

    Use the Thickness screen in the Costing Template Editor to set the thickness and cost values for each class and material combination.

  • Cut

    Use the Cut screen in the Costing Template Editor to define the cost of cutting methods based on length or stroke.

  • Bend

    Use the Bend screen in the Costing Template Editor to define the cost of bending methods based on regular bends or hem bends.

  • Library Features

    Use the Library Features screen in the Costing Template Editor to define the cost of library features, punch features, and forming tools in the part.

  • Custom

    Use the Custom screen in the Costing Template Editor to define additional operations that contribute to a part's manufacturing cost, such as powder coating.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Costing Template Editor for Sheet Metal Parts
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21