Hide Table of Contents

Turn

Use the Turn screen in the Costing Template Editor to filter the machines associated with turning operations.

To display this screen:
  • In the Costing Template Editor, click Turn.

    The Turn screen is only available after you enter information in the Stock Material screen.

You can copy and paste numerical data in the Costing Template Editor.

Filters

Displays the rows that match the Class, Custom Material, Machine, Tool Type, and Surface Finish selected. These are defined as:

Class Sets the material classes and custom material classes from the SolidWorks material database. You can have many instances of the same Class with a different Custom Material to denote finish and other characteristics that affect costs, but you cannot define physical properties (such as density).
Custom Material Sets a material name associated with the selected Class.
Machine Sets the name of the turning machine.
Tool Type Sets the tooling operation to use. Select one of the following:

OD Turning

Removes material from a part's outer diameter.

ID Turning

Removes material from a part's inner diameter.

Facing

Removes material from a part's end face.

OD Grooving

Adds grooving to a part's outer diameter.

ID Grooving

Adds grooving to a part's inner diameter.

Face Grooving

Adds grooving to a part's end face.

Chamfer/Fillet

Adds chamfers or fillets to a part's edges.
Surface Finish Sets the finish generated by the tool while removing material. Select one of the following:

Roughing

Creates a standard finish generated by the tool. Use roughing to remove the maximum material.

Semi-Finishing

Creates a smoother finish than roughing.

Finishing

Creates the smoothest finish.
H Height Sets the width of the groove-cutting tool.
Fr Feed rate Sets the length of feed per revolution.
S Surface speed Sets the speed of the spinning surface.
d Radial depth of cut Sets the depth of the cut (radius inward from outside surface).
r Tool nose radius Sets the radius of the nose end of tooling.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Turn
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21