Hide Table of Contents

Meshing Tips

  • When you mesh a study, the software meshes all unsuppressed solids, shells, and beams:
    • Uses Solid mesh for bulky objects.
    • Uses Shell elements for thin objects like sheet metals.
    • Uses Beam or Truss elements for extruded or revolved objects with constant cross-sections.
    • For assemblies, check component interference. To detect interference in an assembly, click Tools > Interference Detection . Interference is allowed only when using shrink fit. The Treat coincidence as interference and Include multibody part interferences options allow you to detect touching areas. Theses are the only areas affected by the global and component contact settings.
  • Compatible meshing is more accurate than incompatible meshing in the interface region. Requesting compatible meshing can cause mesh failure in some cases. Requesting incompatible meshing can result in successful results. You can request compatible meshing and select Remesh failed parts with incompatible mesh so that the software uses incompatible meshing only for bodies that fail to mesh.
  • Check for interferences between bodies when using a compatible mesh with the curvature-based mesher. If you specify a bonded contact condition between bodies, they should be touching. If interferences are detected, meshing stops, and you can access the Interference Detection PropertyManager to view the interfering parts. Make sure to resolve all interferences before you mesh again.
  • If meshing fails, use the Failure Diagnostics tool to locate the cause of mesh failure. Try the proposed options to solve the problem. You can also try different element size, define mesh control, or activate Enable automatic looping for solids.
  • The SolidWorks Simplify utility lets you suppress features that meet a specified simplification factor. In the Simulation study tree, right-click Mesh and select Simplify Model for Meshing . This displays the Simplify utility.
    Simplification of geometry can alter stress results significantly.
  • It is good practice to check mesh options before meshing. For example, Automatic transition can result in generating an unnecessarily large number of elements for models with many small features. The high quality mesh is recommended for most cases. Automatic looping can help solve meshing problems automatically, but you can adjust its settings for a particular model. The Curvature-based mesher automatically uses smaller element sizes in regions with high curvature.
  • To improve results in important areas, use mesh control to set a smaller element size. When meshing an assembly with a wide range of component sizes, default meshing results in a relatively coarse mesh for small components. Component mesh control offers an easy way to give more importance to the selected small components. Use this option to identify important small components.
  • The curvature-based mesher supports multi-threaded surface and volume meshing for assembly and multi-body part documents. The standard mesher supports only multi-threaded volume meshing.
    For static studies, you can use the h-adaptive method to refine the mesh automatically.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Meshing Tips
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.46