Hide Table of Contents

Apply Envelope Dialog Box - Show or Hide

In the Apply Envelope dialog box, specify selection criteria to hide or show assembly components based on their positions relative to an envelope component.

To open this dialog box, in the FeatureManager design tree or graphics area, right-click an envelope and click Envelope > Show/Hide Using Envelope.

The Show/Hide Using Envelope tool is available only for envelopes made from parts, and only in the top-level assembly. It is not available for envelopes made from subassemblies, and is not available for envelopes within subassemblies.

Criteria

Specifies criteria for selecting components. Choose one or more.

    Treat coincidence as crossing
    Cleared Selected
Inside envelope Selects components that are completely inside the envelope, including those that are inside but touching the envelope. To exclude components that touch the envelope, select Treat coincidence as crossing. envelope_select_inside_env_treat_cleared.gif envelope_select_inside_env_treat_selected.gif
Outside envelope Selects components that are completely outside the envelope, including those that are outside but touching the envelope. To exclude components that touch the envelope, select Treat coincidence as crossing. envelope_select_outside_env_treat_cleared.gif envelope_select_outside_env_treat_selected.gif
Crossing envelope Selects components that cross the boundary of the envelope, excluding those that touch but do not cross the envelope. To include components that touch but do not cross the envelope, select Treat coincidence as crossing. envelope_select_crossing_env_treat_cleared.gif envelope_select_crossing_env_treat_selected.gif

Show/Hide Options

Specifies the action to apply to components depending on whether or not they meet the specified criteria.

Show part components Shows the components that meet the specified criteria.
Choose one of the following to specify what to do with components that do not meet the selction criteria:

Hide it

Hides components that do not meet the criteria, regardless of their current show/hide state.

Leave its show/hide state as it is

Leaves components that do not meet the criteria in their current show/hide state.
Hide part components Hides the components that meet the specified criteria.
Choose one of the following to specify what to do with components that do not meet the selction criteria:

Show it

Shows components that do not meet the criteria, regardless of their current show/hide state.

Leave its show/hide state as it is

Leaves components that do not meet the criteria in their current show/hide state.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Apply Envelope Dialog Box - Show or Hide
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.46