Specify the following properties when you edit an area hatch or fill pattern in a drawing.
Properties
| Hatch |
Applies a hatch pattern to the region. When selected, you can set the  , and Hatch Pattern Angle  .
|
| Solid |
Applies a black fill to the region.
|
To change the fill color, select the fill in the graphics area and click Line Color  (Line Format toolbar). You cannot change the color of an area hatch in a section view.
|
| None |
Removes the area hatch or fill from the region.
|
| Material crosshatch (available for section views and aligned section views) |
Uses the pattern, scale, and angle for the material specified in the part document.
|
| Apply to (available for section views and aligned section views)
|
Select one of the following:
|
Component
|
Applies the area hatch or fill to the currently selected component only.
|
|
Region
|
Applies the area hatch or fill to the currently selected surface only.
|
|
View
|
Applies the area hatch or fill to all instances in the currently active section view.
|
|
Body
|
Applies the area hatch or fill to selected bodies.
|
|
Layer 
Applies the area hatch or fill to the specified drawing layer.
Options
| Apply changes immediately |
Updates the drawing view immediately with your changes in the PropertyManager.
|
| Apply (available when Apply changes immediately is cleared) |
Updates the drawing view when you want to improve performance time. |