The Type determines how far the feature extends.
| Blind
|
Extends the feature from the sketch plane for a specified distance. |
| Through All |
Extends the feature from the sketch plane through all existing geometry. |
| Up to Next |
Extends the feature from the sketch plane to the next surface that intercepts the entire profile. (The intercepting surface must be on the same part.) |
| Up to Vertex |
Extends the feature from the sketch plane to a plane that is parallel to the sketch plane and passing through the specified vertex. Select a vertex. |
| Up to Surface |
Extends the feature from the sketch plane to the selected surface. |
| Offset from Surface |
Extends the feature from the sketch plane to a specified distance from the selected surface.
Select a face to specify the surface, then specify an offset distance. |
| Up to Body |
Extends the feature up to the selected body. Use this option with assemblies, mold parts, or multibody parts.
Select a solid or surface body up to which the feature extends. |
| Mid Plane |
Extends the feature from the sketch plane equally in both directions.
Specify a depth. |