- Aligning Angular Dimensions with Soft Snaps
You can align angular dimensions with soft snaps that match the offsets specified in Document Properties. You can also drag an angular dimension to align it with adjacent dimensions using soft snaps.
- Angular Running Dimensions
Angular running dimensions are a set of dimensions measured from a zero-degree dimension in a drawing or sketch.
- Assigning Styles to Dimension Line Elements
You can assign line styles to dimension leaders, dimension lines, and extension lines using the Dimension PropertyManager.
- Automatically Finding Virtual Sharps for Dimensions
While in the dimension tool, you can define virtual sharps between two entities and use the virtual sharps for dimensioning.
- Dimensioning Two Points of the Same Arc
You can add a dimension where both ends are on the same arc, such as in the case of radii and holes where it is necessary to dimension both quadrants or the center and a quadrant.
- Highlighting Associated Geometry
In modeling and assembly environments, when you select a reference dimension, the associated model geometry highlights.
- Placing Dimension Text
For ISO Drafting Standard dimensions with solid leader and aligned text, you can use the Dimension PropertyManager to place text above and below dimension lines, or split dual-dimension text above and below dimension lines.
- Setting Extension Line to Show Centerline
You can set individual extension lines to display as centerline style. This lets you identify when an extension line extends from a hole.