Hide Table of Contents

Costing Options

You can define or override system-level costing options in the Costing Options dialog box.

You can select sheet metal Costing options to do the following:
  • Estimate the cost of sheet metal parts from a machining template.
  • Apply fixed custom costs to sheet metal features, such as bends, hems, or library features.
You can select machining Costing options to:
  • Recognize removed material as volume features.
  • Assign a default machining operation to volume features, or calculate the cost of volume features by assigning a per volume cost to the removed material.
  • Assign the default surface finishing operation for milling and turning on machined parts.
  • Override template settings for offset-based finishing. You can type a value for the offset from the machined surface for finishing and semifinishing operations.

To access the Costing Options dialog box, in the Costing Task Pane, click Costing Options CostingOptions_up.png (upper left corner).

Estimating Sheet Metal Part Costs from a Machining Template

To include the cost of plate geometries in sheet metal parts, you can use a machining template for sheet metal part costing.

To use a machining template for costing a sheet metal part:

  1. Click Costing tool_costing_tools.gif (Tools toolbar or the Evaluate tab on the CommandManager) or Tools > Costing.
  2. In the Costing task pane, click Costing Options CostingOptions_up.png (upper left corner).
  3. In the dialog box, select Use machining template for sheet metal parts.
  4. Set other options and click OK.

    You can select Save as Costing default settings to retain the Costing Options dialog box settings for future use.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Costing Options
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.