Evaluating the Cost of a Multibody Part

Run the Costing tool to determine the cost of manufacturing a multibody part.

1. In a multibody part, click Costing (Tools toolbar or the Evaluate tab on the CommandManager) or Tools > Costing.
   
   
2. In the Costing Task Pane, under Costing Templates, in Main template, select a template.

   The Sheet metal template and Machining template are populated with the templates assigned to the Main template.

3. Under Body List:
   1. Select the first body listed.

      The selected body is highlighted in the graphics area.

   2. Set one of the following:

      Type of body	Determines the Costing template that is referenced in the cost estimation for each body type. Sheet metal bodies are automatically recognized. You must assign the type of body for the other types of bodies in the part. If you select Custom, type a Custom cost.
      Exclude	Excludes the selected bodies from cost calculations.
      Include	Includes the selected bodies for cost calculations.

   3. Under Material, make selections for Material and Specific Material if they are not populated.
4. Repeat the previous step for all bodies in the part.

   The green message area indicates you can start the cost estimation.

5. Click Begin Cost Estimation.

   The CostingManager displays the bodies with their types and materials in their appropriate folders. If you exclude a body from the Costing computation, it appears in the No Cost Assigned folder. Excluded bodies are hidden in the graphics area. The Setup folder has the setup costs for the part level, not the body level. The Custom Operations folder is at the part level.

   The setup cost is derived from the setup time you specify in the template.
   You can expand an item in the CostingManager to see the estimated cost of the body and the template applied to the cost estimation.