隱藏目錄

Creating Conditions for Categories

You can create conditions to control how Enterprise PDM assigns files and items to categories.

To create conditions for categories:

  1. Expand Categories, then right-click a category and select Properties.
  2. Under Conditions, click New .
  3. Under Type, click Click here to change, select a condition type, and provide additional input as required by the type.
  4. Optionally add more conditions.

    By default, conditions are AND conditions, meaning all conditions must be true for the file or item to pass the transition. You can also define OR conditions, meaning at least one condition must be true.

  5. To define OR conditions:
    1. Click Or to create an OR container.
    2. Drag two or more conditions into the OR container.
  6. When you are done adding conditions or otherwise editing the category, click OK.

Condition Operators for Categories

When defining conditions for categories, you can use the following operators in the Argument column.

Operator Description Example
> Greater than >123
< Less than <123
>= Greater than or equal to >=123
<= Less than or equal to <=123
!= Not equal to !=123
% (percent) Any string of zero or more characters %put% matches "put", "putter", "output", and "computer"
_ (underscore) Any single character _cad matches "ecad" and "mcad"
[chars] Any single character in the set or range Rev[A1] matches "RevA" and "Rev1". Rev[A-C] matches "RevA", "RevB", and "RevC"
[^chars] Any single character not in the set or range de[^xyz]% matches all strings beginning with "de" where the next letter is not "x", "y", or "z".


提供對此主題的意見反應

SOLIDWORKS 歡迎您提供有關於文件呈現方式、正確性、及完整性的意見反應。請使用下方的表格直接將您對此主題的意見與建議傳送給我們的文件團隊。文件團隊並無法回答關於技術支援的問題。按一下此處來獲得關於技術支援的資訊

* 必要的

 
*電子郵件:  
主旨:   說明主題的意見反應
頁面:   Creating Conditions for Categories
*意見:  
*   我承認已閱讀且僅此接受隱私權政策,Dassault Systèmes 將遵循此政策之規定使用我的個人資料

列印主題

選擇要列印的內容範圍:

x

偵測到您使用的瀏覽器版本是舊於 Internet Explorer 7。要獲得最佳的顯示,建議您升級瀏覽器到 Internet Explorer 7 或更新的版本。

 不要再次顯示此訊息
x

Web 式說明內容版本:SOLIDWORKS PDM 2014 SP05

要從 SOLIDWORKS 中停用 Web 式的說明並改用本機說明,請按一下說明 > 使用 SOLIDWORKS Web 式說明

要報告在 Web 式說明介面及搜尋中遇到的問題,請聯絡您當地的技術支援代表。要針對個別說明主題提供意見反應,請使用個別主題頁面中的「提供對此主題的意見反應」連結。