隱藏目錄

Using the Weldment Cut List BOM Type

To extract and display the length and quantity of weldment components in SOLIDWORKS parts, you use the weldment cut list BOM type.

This BOM type operates with a SOLIDWORKS part data card with a variable mapped to the custom property UNIT_OF_MEASURE, which extracts the value of the BOM quantity property defined for SOLIDWORKS cut list items.

The default versions of the BOM type and data card that are installed with Enterprise PDM 2009 and later contain this mapping. If you upgrade a vault created in an earlier version of Enterprise PDM, you can import the default BOM type and data card.

  • To install the default weldment cut list BOM type, import <install_dir>\Program Files\SOLIDWORKS Enterprise PDM\Default Data\all_workflow_<language>.cex.
  • To install the default SOLIDWORKS part data card, import <install_dir>\Program Files\SOLIDWORKS Enterprise PDM\Default Cards\all(sldprt_prt)_<language>.crd.

You can also configure an older SOLIDWORKS part data card to work with the weldment cut list BOM type.

To configure a SOLIDWORKS part data card and create a weldment cut list BOM:

  1. Expand Cards, expand File Cards, and double-click SOLIDWORKS Part Card (sldprt).
  2. If the card does not contain an edit box with a variable to hold the length value from the weldment cut list, add an edit box and select BOM Quantity as the Variable name.
  3. Click Variables.
  4. In the Edit Variables dialog box, under Attributes:
    1. For Block name, select CustomProperty.
    2. For Attribute name, type UNIT_OF_MEASURE.
    3. For file extensions, type sldprt, sldasm.
    4. Click OK.
  5. Save the card.
  6. Expand Bill of Materials and double-click Weldment Cutlist.
  7. In the Bill of Materials dialog box, to define a column to hold the component length, under Selected column:
    1. For Variable, select BOM Quantity.
    2. For Name, type Length.
    3. Specify the column Width and Alignment.
  8. To define a column to hold the component quantity:
    1. For Variable, select <Reference Count (BOM Quantity disregarded)>.
    2. For Name, type Qty.
    3. Specify the column Width and Alignment.
The Length for weldment components is extracted from the component property that is defined as the BOM quantity in SOLIDWORKS. When the weldment part is checked in to the vault, the check in command lists all weldment components as references.
  • On the Contains tab for the part, right-click a component and select Properties. The length is shown in the BOM Quantity variable.
  • On the Bill of Materials tab, the Weldment Cut List displays the length and quantity for each weldment component.


提供對此主題的意見反應

SOLIDWORKS 歡迎您提供有關於文件呈現方式、正確性、及完整性的意見反應。請使用下方的表格直接將您對此主題的意見與建議傳送給我們的文件團隊。文件團隊並無法回答關於技術支援的問題。按一下此處來獲得關於技術支援的資訊。

* 必要的

 
*電子郵件:  
主旨:   說明主題的意見反應
頁面:   Using the Weldment Cut List BOM Type
*意見:  
*   我承認已閱讀且僅此接受隱私權政策，Dassault Systèmes 將遵循此政策之規定使用我的個人資料

列印主題

選擇要列印的內容範圍：

x

偵測到您使用的瀏覽器版本是舊於 Internet Explorer 7。要獲得最佳的顯示，建議您升級瀏覽器到 Internet Explorer 7 或更新的版本。

 不要再次顯示此訊息
x

Web 式說明內容版本：SOLIDWORKS PDM 2014 SP05

要從 SOLIDWORKS 中停用 Web 式的說明並改用本機說明，請按一下說明 > 使用 SOLIDWORKS Web 式說明。

要報告在 Web 式說明介面及搜尋中遇到的問題，請聯絡您當地的技術支援代表。要針對個別說明主題提供意見反應，請使用個別主題頁面中的「提供對此主題的意見反應」連結。

0.20.46