隱藏目錄

Migrating from Partial to Complete Toolbox Integration

If you are using partial Toolbox integration, where the master library is outside the vault but part files also exist in the vault, consolidate the library in the vault before installing or upgrading SOLIDWORKS and configuring the SOLIDWORKS integration.

When the same files exist both outside and inside the vault, the procedure you use depends on where the newer files are located. Typically, files in the vault are newer. Files outside the vault might be newer if some users are working with the shared Toolbox library but are not using Enterprise PDM to manage their designs.

To migrate to complete Toolbox integration:

  1. If files outside the vault are newer than those in the vault (not typical), check out the entire Toolbox.
  2. Copy the Toolbox root folder that is outside the vault into the vault.

    If the same files exist both outside and inside the vault, you are prompted to overwrite the vault files. If your vault files are newer (typical), choose not to overwrite vault files. If files outside the vault are newer, choose to overwrite vault files.

  3. Check in the Toolbox vault folder.

    The vault now contains the latest versions of all Toolbox parts.

  4. Rename or move the old shared Toolbox (outside the vault) so that it is not accessible to users.

    If you plan to delete the old shared Toolbox, back it up first.

  5. Upgrade SOLIDWORKS and Enterprise PDM to 2010 or later as described in Upgrading to Manager Toolbox Entirely in the Vault.
  6. Configure Toolbox as described in Configuring Toolbox in Enterprise PDM and SOLIDWORKS.

    Select Manage SOLIDWORKS Toolbox in the vault and Search subfolders for Toolbox parts on assembly check-in when you configure Toolbox.

  7. Complete the steps in Post-Migration Instructions for Toolbox Users.


提供對此主題的意見反應

SOLIDWORKS 歡迎您提供有關於文件呈現方式、正確性、及完整性的意見反應。請使用下方的表格直接將您對此主題的意見與建議傳送給我們的文件團隊。文件團隊並無法回答關於技術支援的問題。按一下此處來獲得關於技術支援的資訊

* 必要的

 
*電子郵件:  
主旨:   說明主題的意見反應
頁面:   Migrating from Partial to Complete Toolbox Integration
*意見:  
*   我承認已閱讀且僅此接受隱私權政策,Dassault Systèmes 將遵循此政策之規定使用我的個人資料

列印主題

選擇要列印的內容範圍:

x

偵測到您使用的瀏覽器版本是舊於 Internet Explorer 7。要獲得最佳的顯示,建議您升級瀏覽器到 Internet Explorer 7 或更新的版本。

 不要再次顯示此訊息
x

Web 式說明內容版本:SOLIDWORKS PDM 2014 SP05

要從 SOLIDWORKS 中停用 Web 式的說明並改用本機說明,請按一下說明 > 使用 SOLIDWORKS Web 式說明

要報告在 Web 式說明介面及搜尋中遇到的問題,請聯絡您當地的技術支援代表。要針對個別說明主題提供意見反應,請使用個別主題頁面中的「提供對此主題的意見反應」連結。