**Operators, Functions, and Constants**

When you use trigonometric functions in equations, specify the angular units by selecting Degrees or Radians in Angular Equation Units in the Equations dialog box.

Operator |
Name |
Notes |

+ | plus sign | addition |

- | minus sign | subtraction |

* | asterisk | multiplication |

/ | forward dash | division |

^ | caret | exponentiation |

Function |
||

sin (a) | sine | a is the angle; returns the sine ratio |

cos (a) | cosine | a is the angle; returns the cosine ratio |

tan (a) | tangent | a is the angle; returns the tangent ratio |

sec (a) | secant | a is the angle; returns the secant ratio |

cosec (a) | cosecant | a is the angle; returns the cosecant ratio |

cotan (a) | cotangent | a is the angle; returns the cotangent ratio |

arcsin (a) | inverse sine | a is the sine ratio; returns the angle |

arccos (a) | inverse cosine | a is the cosine ratio; returns the angle |

atn (a) | inverse tangent | a is the tangent ratio; returns the angle |

arcsec (a) | inverse secant | a is the secant ratio; returns the angle |

arccosec (a) | inverse cosecant | a is the cosecant ratio; returns the angle |

arccotan (a) | inverse cotangent | a is the cotangent ratio; returns the angle |

abs (a) | absolute value | returns the absolute value of a |

exp (n) | exponential | returns e raised to the power of n |

log (a) | logarithmic | returns the natural log of a to the base e |

sqr (a) | square root | returns the square root of a |

int (a) | integer | returns a as an integer |

sgn (a) | sign | returns the sign of a as -1 or 1
For example: sgn(-21) returns -1 |

Constant |
||

pi | pi | ratio of the circumference to the diameter of a circle (3.14...) |

x

Never show this message again

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click **Help > Use SOLIDWORKS Web Help**.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.