Hide Table of Contents

Modifying Geometry with the Intersect Tool

You can intersect solids, surfaces, and planes to modify existing geometry, or to create new geometry with the Intersect tool.

For example, you can add open surface geometry to a solid, remove material from a model, or you can create geometry from an enclosed cavity. You can also merge solids that you define with the Intersect tool, or cap some surfaces to define closed volumes.

Open surface and a solid body Two halves of a mold
Intersect theme image 01.png Mold 01.png
The open surface defines details that you can add to the body with the Intersect tool. The empty cavity enclosed by the two mold bodies defines a body you can create with the Intersect tool.
Intersect theme image 02.png Mold 02.png
You can remove the geometry you do not require with the Intersect tool. You can remove the mold bodies and create a solid from the empty cavity with the Intersect tool.
Intersect theme image 03.png Mold 03.png

To create geometry from solids, surfaces, or planes in a part:

  1. Click Intersect tool_intersect.gif (Features toolbar) or Insert > Features > Intersect.
  2. Select solids, surfaces, or planes.
  3. Click Intersect.
  4. Select the regions to exclude and click PM_OK.gif.

Contents

  • Intersecting Bodies to Modify Part Geometry

    You can intersect and merge surfaces, planes, or solid bodies in a part with the Intersect tool. For example, you can add details to a body by merging it with a coincident open surface. You can also split a body by intersecting it with a plane.

  • Creating Solids from Enclosed Cavities with the Intersect Tool

    You can create a solid from a cavity by merging coincident surface or solid bodies in a part, and then removing the geometry defined by the bodies that enclose the cavity.

  • Intersect PropertyManager

    You can intersect solids, surfaces, or planes to modify existing geometry, or to create new geometry with the Intersect tool.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Modifying Geometry with the Intersect Tool
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.61