Hide Table of Contents

P&ID File Format

The .xml file specifies each piece of equipment and pipe or tube system to include in the routing assembly, and must adhere to the SOLIDWORKS P&ID file format.

To view an example of the P&ID file format, double-click the sample P&ID xml file from the following location in C:\ProgramData or C:\Documents and Settings\All Users\Application Data, depending on your operating system:
SOLIDWORKS\SOLIDWORKS version\design library\routing\piping\pnid sample version.xml

P&ID Data

Attribute string values are optional unless otherwise noted. Required values and elements are indicated by *.
Element Attribute Element or Attribute Description
<PnIDData>*   Specifies the container element that starts all P&ID files.
Requires the closing element </PnIDData>.
<version> value Defines a string value for the P&ID file version.
<SystemInfo>*   Specifies a container for elements describing the piping and instrumentation system.
Requires the closing element </SystemInfo>.
<Description>* value* Defines a string value that describes the piping and instrumentation system.
The description appears in the tree view of a P&ID validation report.
<Comment> value Defines a string value for a comment about the P&ID file.
<EquipmentReferenced>*   Specifies the container element for all <Equipment> elements in the piping and instrumentation system.
Requires the closing element </EquipmentReferenced>.
<PipelineInfo>   Specifies a container element for pipe fittings and connections.
Requires the closing element </PipelineInfo>.
You can define multiple elements to model multiple pipelines in the routing assembly, but you cannot assign two pipelines with the same tag in separate routing assemblies.
<TubelineInfo>   Specifies a container element for tube fittings and connections.
Requires the closing element </TubelineInfo>.
You can define multiple elements to model multiple tubelines in the routing assembly, but you cannot assign two tubelines with the same tag in separate routing assemblies.
<Description> value Defines a string value that describes the piping or tubing system.
<Comment> value Defines a string value for a comment about the piping or tubing system.
<Name>* value* Defines a string value for the name of the piping or tubing system.
<Tag>* value* Defines a unique string value for the piping or tubing system tag.
This value appears in the Piping and Instrumentation tab of the Task Pane.
<In-lineFittings>*   Specifies a container element for pipe or tube fittings defined in <Fitting> elements.
Requires the closing element </In-lineFittings>.
<Connections>*   Specifies a container element for pipe or tube connections defined in <PipeSegment> or <TubeSegment> elements.
Requires the closing element </Connections>.

Equipment and Fittings

Attribute string values are optional unless otherwise noted.
Element Attribute Element or Attribute Description
<Equipment> * or <Fitting>*   Specifies the container element for a piece of equipment or fitting in the piping and instrumentation system.
Requires the appropriate closing element.
<ID>* value* Defines a unique string value that identifies the piece of equipment or fitting.
<Tag>* value* Defines a unique string value for the equipment or fitting tag.
This value appears in the Piping and Instrumentation tab of the Task Pane.
<Description> value Defines a string value that describes the piece of equipment or fitting.
<PartNumber> value Defines a string value for a SOLIDWORKS part number for the piece of equipment or fitting.
If you do not assign a part number, you can specify the library search with the <Type>, <SubType>, <Size>, and <Specification> elements.
<Config> value Defines a string value for the SOLIDWORKS part configuration for the piece of equipment or fitting.
<Area> value Defines a string value for the equipment or fitting Area subtag.
<Type> value Defines a string value for the component type, for example, "tee" or "reducer".
If you do not assign a <Type> value, you are prompted to search for the file when the Select Component dialog box appears.
<SubType> value For valve part types, defines a string value for the subtype, for example, "gate" or "globe".
<System> value Defines a string value for the equipment System subtag, which assigns a name to the routing subsystem to which the piece of equipment or fitting belongs.
<Size> value Defines a string value for the equipment or fitting Size subtag, which specifies the nominal size. The size aids the database search when you do not specify the part number and configuration.
<Specification> value Defines a string value for the Specification subtag.
<Custom>  
Specifies the container element for custom attributes and values. Include the <CustomAttribute> element within the <Custom> element.
Custom attribute values provide metadata, but are not referenced when you create the routing assembly from the P&ID file.

For example, to define a custom attribute width with the value 1.345 for a pipe segment, include the following in the <PipeSegment> element: <Custom> <CustomAttribute name="width" value="1.345"/> </Custom>.
<CustomAttribute> name Defines a string for the name of the custom attribute.
value Defines a string value for the custom attribute.

PipeSegment

Element Attribute Element or Attribute Description
<PipeSegment>*   Specifies the container element for a pipe segment in the piping and instrumentation system.
Requires the closing element </PipeSegment>.
<ID>* value* Defines a unique string value that identifies the pipe segment.
<Tag>* v*alue Defines a unique string value for the pipe segment tag.
<Diameter> value Defines a string value for the pipe diameter. This value is interpreted in inches.
<FromEquip>* value* Defines a string that matches the <tag> value of the equipment from where the pipe segment is routed.
You can reference tag values for any <Equipment> element and to any <Fitting> elements specified within the same <PipelineInfo> element.
<FromEquipPort>* value* Defines a string value for an equipment port from which the pipe segment is routed.
<FromEquipSize> value Defines a string value for the size of the equipment from which the pipe segment is routed.
<ToEquip>* value* Defines a string that matches the <tag> value of the equipment to where the pipe segment is routed.
You can reference tag values for any <Equipment> element and to any <Fitting> elements specified within the same <PipelineInfo> element.
<ToEquipPort>* value* Defines a string value for an equipment connection point port ID to which the pipe segment is routed.
<ToEquipSize> * value* Defines a string value for the size of the equipment to which the pipe segment is routed.
<Area> value Defines a string value for the pipe segment Area subtag.
<System> value Defines a string value for the pipe segment System subtag, which assigns a name to the routing subsystem to which the pipe segment belongs.
<Size> value Defines a string value for the pipe segment Size subtag, which specifies the nominal size.
<Fluid> value Defines a string value for the pipe segment Fluid subtag, which specifies the type of fluid transported through the pipe segment, such as oil or water.
<PhaseState> value Defines a string value for the pipe segment Phase State subtag, which specifies the physical phase of the material transported through the pipe segment. Assign one of the following values:

Solid

Liquid

Gas

<Insulation> value Defines a string value for the pipe segment Insulation subtag.
<Identifier> value Defines a string value for the pipe segment Identifier subtag.
Enter a unique value for the Identifier subtag to ensure that each pipe segment tag defined from your tag scheme is unique.
<Custom>  
Specifies the container element for custom attributes and values. Include the <CustomAttribute> element within the <Custom> element.
Custom attribute values provide metadata, but are not referenced when you create the routing assembly from the P&ID file.
<CustomAttribute> name Defines a string for the name of the custom attribute.
value Defines a string value for the custom attribute.

TubeSegment

Element Attribute Element or Attribute Description
<TubeSegment>*   Specifies the container element for a tube segment in the piping and instrumentation system.
Requires the closing element </PipeSegment>.
<ID>* value* Defines a unique string value that identifies the tube segment.
<Tag>* v*alue Defines a unique string value for the tube segment tag.
<Diameter> value Defines a string value for the tube diameter. This value is interpreted in inches.
<FromEquip>* value* Defines a string that matches the <tag> value of the equipment from where the tube segment is routed.
You can reference tag values for any <Equipment> element and to any <Fitting> elements specified within the same <PipelineInfo> element.
<FromEquipPort>* value* Defines a string value for an equipment port from which the tube segment is routed.
<FromEquipSize> value Defines a string value for the size of the equipment from which the tube segment is routed.
<ToEquip>* value* Defines a string that matches the <tag> value of the equipment to where the tube segment is routed.
You can reference tag values for any <Equipment> element and to any <Fitting> elements specified within the same <TubelineInfo> element.
<ToEquipPort>* value* Defines a string value for an equipment connection point port ID to which the tube segment is routed.
<ToEquipSize> * value* Defines a string value for the size of the equipment to which the tube segment is routed.
<Area> value Defines a string value for the tube segment Area subtag.
<System> value Defines a string value for the tube segment System subtag, which assigns a name to the routing subsystem to which the pipe segment belongs.
<Size> value Defines a string value for the tube segment Size subtag, which specifies the nominal size.
<Fluid> value Defines a string value for the tube segment Fluid subtag, which specifies the type of fluid transported through the tube segment, such as oil or water.
<PhaseState> value Defines a string value for the tube segment Phase State subtag, which specifies the physical phase of the material transported through the tube segment. Assign one of the following values:

Solid

Liquid

Gas

<Insulation> value Defines a string value for the tube segment Insulation subtag.
<Identifier> value Defines a string value for the tube segment Identifier subtag.
Enter a unique value for the Identifier subtag to ensure that each tube segment tag defined from your tag scheme is unique.
<Custom>  
Specifies the container element for custom attributes and values. Include the <CustomAttribute> element within the <Custom> element.
Custom attribute values provide metadata, but are not referenced when you create the routing assembly from the P&ID file.
<CustomAttribute> name Defines a string for the name of the custom attribute.
value Defines a string value for the custom attribute.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   P&ID File Format
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.49