Hide Table of Contents

Location Label PropertyManager

To display the Location Label PropertyManager, do one of the following:

  • In a drawing with a detail, section, or auxiliary drawing view, click Insert > Annotations > Location Label.
  • Select an existing location label.
  • Right-click a detail, section, or auxiliary drawing view and click Annotations > Location Label.

Set the options in the PropertyManager and click in the graphics area to place the location label as follows:

  • In a section view, click the section cutting line or the child view.
  • In a detail view, click the detail view circle or the child view.
  • In an auxiliary view, click the reference edge or the child view.

The PropertyManager controls the following properties:

Settings

Style Select a style for the shape and border of the location label from the list.

Circular Split Line

Square Split Line

Verbose

Size Select a size from the list (a specified number of characters), Tight fit (which adjusts automatically to the text), or User Defined (where you can set the size below).
Padding If you select Tight fit in Size, you can add padding to specify an offset between the border and text.
User defined If you select User Defined in Size, you can set the size.
Upper text Select the type of text for the upper field in the location label.

Text

Allows you to type custom text in the location label.

Sheet

Shows the sheet number of the location label.

Sheet with label

Shows sheet number of the location label with SH prepended.

Zone

Shows the zone of the location label.

View letter

Shows the individual view letter of the associated child view.
Lower text Select the type of text for the lower field in the location label.

Text

Allows you to type custom text in the location label.

Sheet

Shows the sheet number of the location label.

Sheet with label

Shows sheet number of the location label with SH prepended.

Zone

Shows the zone of the location label.

View letter

Shows the individual view letter of the associated child view.

Layer

PM_Layer.gif Layer

Applies the location label to the specified drawing layer.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Location Label PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21