Hide Table of Contents

Building SOLIDWORKS Assemblies from ECAD Files

You can build a SOLIDWORKS assembly that represents the board, components, and other features in your ECAD data.

To build an assembly:

  1. If an assembly is open in SOLIDWORKS, close it.

    If an assembly is open in SOLIDWORKS, CircuitWorks tries to update it instead of building a new assembly.

  2. Ensure that the ECAD data open in CircuitWorks represents the model you want to build.

    For example, apply filters as needed to omit features from the model.

  3. Set the SOLIDWORKS Import options from the CircuitWorks Options dialog box.
  4. Click Build Model (SOLIDWORKS pane of the Tools tab).
    Maximize the CircuitWorks application user interface to display the SOLIDWORKS pane tools if required.

    CircuitWorks scans the ECAD data for possible build issues and displays the results in a dialog box.

    If CircuitWorks reports build warnings, you can click Cancel to cancel the build, correct the warnings, and restart the build process. However, most warnings do not prevent CircuitWorks from building the assembly.

  5. From the CircuitWorks scan-results dialog box, click Build.

    If a model already exists and you have enabled the option to be warned before overwriting, a confirmation box appears. Click Yes to overwrite the existing model or No to use the existing model.

  6. From SOLIDWORKS, save the completed assembly.
CircuitWorks creates the board with fixed position. If you move the board and update the assembly, CircuitWorks flags all components as having moved.

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Building SOLIDWORKS Assemblies from ECAD Files
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.