Hide Table of Contents

Result Options PropertyManager

The Result Options PropertyManager allows you to set result options for static, linear dynamic, nonlinear studies, and thermal transient studies.

Quantities to Save into File

Available for static studies only.

Stresses and Strains When selected, the program stores the stress and strain results in the result file (*.CWR). When this option is cleared, the program calculates and saves only displacement and body force results.

The default option for the solver is to calculate and store all the results.

Clear this option, if you want to run a fast analysis to view displacement results of your model, and save disk storage space.
For all solution steps When selected, the program saves the results at all solution steps.
For specified solution steps When selected, the program saves the results at solution steps specified in sets.

Quantity

Available for linear dynamic studies only. Results of the following quantities are saved when selected:

Displacements and velocities

Relative

(Relative to the base. Applicable to linear dynamic studies with uniform base excitation.)

Absolute

If you apply selected base excitation, results are reported always in absolute values.

Stress and Reactions  
PSD Stresses (Applicable to random vibration studies)
Acceleration quantities are always absolute. Nonlinear dynamic studies always save relative displacements and velocities.

Solution Steps - Set 1

Appears if For specified solution steps is selected.

Start The first solution step number.
End The last solution step number.
Increment Solution step increment.

Solution Steps - Set 2

Appears if Solution Steps - Set 1 is selected. You can specify up to five sets.

Locations for Graphs

Appears if For specified solution steps is selected. Select vertices and reference points to save the results. Results are saved at every solution step.

If you do not select at least one entity, the results are saved for all nodes.
For all solution steps When checked, the program saves the results at all solution steps.
For specified solution steps When checked, the program saves the results at solution steps specified in sets.

Mode Selection

Available for linear dynamic studies only (time history, harmonic, and random vibration).

All modes When selected, all the available normal modes participate in the dynamic solution.
Selected modes When selected, you can choose the normal modes you want to include in the dynamic solution.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Result Options PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.