Hide Table of Contents

External File Format for Curve Data

  1. The file must be a text file.
  2. For Time, Temperature, and S-N Curves:
    • A row that begins with # is ignored. Use such lines for header and comment information.
    • Two numbers are then read from each row . The first number is time, temperature, or cycles depending on the curve type. The second number is a magnitude (for time and temperature curves), or stress (for S-N curves).
  3. For Load History Curves:
    Load History Curves are used to define variable amplitude fatigue events. The format described below is compatible with the SAE (Society of Automotive Engineers) standard format.
    • A row that begins with # is ignored unless it is followed by TIMEstep.
    • A row that begins with #TIMEstep specifies the sampling rate. For example #TIMEstep= 120.00 Seconds specifies that the time increment for each row is 120 seconds.
      • A TIMEstep other than zero specifies that the time column is not included. In this case, channel i refers to column i.
      • A TIMEstep of zero specifies that the first column is the time column . In this case, channel i refers to column (i+1).
      • If no row begins with #TIMEstep, channel i refers to column i (no time column).
    • When using a Load History curve from a library in a study, the program asks for the channel to be retrieved.
    • Each row can have up to 20 numbers. Usually, a comment line (beginning with #) separates data blocks.
This sample file contains a few data points of amplitude only of 1 channel only.
# This row is ignored.
#BEGIN DATA (this row is also ignored)
-999
255
-875
201
-177
433
-487
# Data continues one number in each row.
This sample file contains 3 channels (no time column).
# This row is ignored.
#TIMEstep= 0.001
-195 -296 51
-238 -318 40
-198 -307 55
-168 -297 65
# Data continues 3 numbers in each row.
This sample file contains a time column and 3 channels.
# This row is ignored.
#TIMEstep= 0 # time recorded in first column
0.00 -195 -296 51
.001 -238 -318 40
0.02 -198 -307 55
0.04 -168 -297 65
# Data continues 4 numbers in each row.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   External File Format for Curve Data
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21