Hide Table of Contents

Quick Snaps

Quick Snaps are instantaneous, single operation Sketch Snaps. Sketching any sketch entity (such as a line) from start to finish is a single operation.

Selecting a particular Quick Snaps filters out other Sketch Snaps, enabling you to focus on a particular capability. With Quick Snaps you can:
  • Select a Quick Snap using any sketch tool in an active sketch.
    You can enable Quick Snaps, regardless of whether Enable snapping or the Sketch Snap is selected under Options > System Options > Relations/Snaps .
  • Double-click Quick Snaps on the toolbar to retain the snap capability for multiple instances of the same sketch entity, or until you select different Quick Snaps.
    If you use the click-drag sketch method, you cannot select Quick Snaps from the Quick Snaps toolbar as this would entail releasing the pointer. If you use the click-click sketch method, you can select a quick snap from the toolbar and apply that snap to the sketch entity.

Controlling Quick Snaps

To control Quick Snaps:

  1. In an active sketch, with any sketch tool selected, do one of the following:
    • Menu. Click Tools > Relations > Quick Snaps.
    • Shortcut menu. Right-click, select Quick Snaps.
    • Toolbar. Display the Quick Snaps toolbar.
  2. Select the appropriate Quick Snaps to shift the focus.
    To display System Options > Relations/Snaps, right-click in a sketch, select Relations/Snaps Options.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Quick Snaps
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.62