Hide Table of Contents

Rotate

You can use the Rotate tool_Rotate.gif tool (Heads-up View toolbar) to rotate part and assembly models, as well as drawing, detail, and section views of drawings.

This information is specific to one or more CAD systems. See the eDrawings Functionality Matrix for availability information.
  • The eDrawings software supports display of 3D annotations.
  • To rotate models published from SOLIDWORKS with wireframe, HLR, or HLV views, you must select the Draft Quality HLR/HLV option (View toolbar) in SOLIDWORKS.
  • Annotations in eDrawings part or assembly files published prior to SOLIDWORKS 2006 display improperly when you rotate the model. Re-publish the files in SOLIDWORKS 2006 or later to improve quality.

Rotating Models

To rotate models, do one of the following:

  • Click Rotate tool_Rotate.gif (Heads-up View toolbar) or View > Rotate and drag in the graphics area.
  • Press the arrow keys to rotate vertically or horizontally in 10° increments; hold down Shift with the arrow keys for 90° increments.
  • Hold down the middle mouse button and drag.

Rotating Views in Drawings

To rotate views in drawings:

  1. Select a drawing, detail, or section view.
  2. Click Rotate tool_Rotate.gif (Heads-up View toolbar) or View > Rotate.
    The active view zooms to fit in the graphics area and the pointer changes to .
  3. Drag to rotate the view.
    The drawing view is replaced by the model in the graphics area, so you are rotating the model from which the drawing was created. Annotations are hidden during rotation.
    To return drawings to their original state, click Reset .

    You cannot use the arrow keys or the middle mouse button to rotate views in drawings.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Rotate
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: eDrawings 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.46