Study PropertyManager

The Study PropertyManager allows you to create a new Simulation study.

Type

Static		Creates a static study to calculate the response of bodies on which loads are applied slowly. The loads remain constant after reaching their full magnitudes.
Frequency		Creates a frequency study to calculate the natural frequencies and mode shapes of bodies.
Buckling		Creates a buckling study to calculate the buckling modes and critical buckling loads of bodies.
Thermal		Creates a thermal study to calculate the temperature distribution in bodies due to conduction, convection, and radiation.
Drop Test		Creates a drop test study to evaluate the effect of the impact of a part or an assembly with a rigid or flexible planar surface.
Fatigue		Creates a fatigue study to calculate the total life, damage, and load factors due to cyclic loading.
Pressure Vessel Design		Creates a pressure vessel design study to combine the results of static studies with the desired factors.
Design Study		Creates a Design Study to perform an optimization or evaluate specific scenarios of your design.
Submodeling		Creates a submodeling study to improve the results at local regions of large models without having to rerun the analysis for the whole model.
Nonlinear		Creates a nonlinear study to calculate the nonlinear response of bodies due to applied loads.
Linear Dynamic		Creates a linear dynamic study to calculate the response of bodies by accumulating the contribution of each mode to the loading environment. The loads are not applied slowly and change with time or frequency.

Options

Use 2D Simplification		Creates a 2D simplification study to simplify certain 3D models by simulating them in 2D and saving analysis time. Available analysis types include plane stress, plane strain, extruded and axisymmetric.
Constant amplitude events with defined cycles		Creates a fatigue study with a constant amplitude load.
Variable amplitude history data		Creates a fatigue study with a variable amplitude load.
Harmonic-fatigue of sinusoidal loading		Available for fatigue study. Creates a fatigue study that is based on stress results as a function of frequency from a Dynamic - Harmonic study.
Random vibration - fatigue of random vibration		Available for fatigue study. Creates a fatigue study that is based on stress results as a function of frequency from a Dynamic - Random vibration study.
Static		Available for nonlinear study.
Dynamic		Available for nonlinear study.
Modal Time History		Available for linear dynamic study. Creates a study to calculate the response of bodies as a function of time.
Harmonic		Available for linear dynamic study. Creates a study to calculate the peak steady state response of bodies due to harmonic loads or base excitations.
Random Vibration		Available for linear dynamic study. Creates a study to calculate the response of bodies due to non-deterministic loads.
Response Spectrum Analysis		Available for linear dynamic study. Creates a study to estimate the response of structures to random or time-dependent loading environments.