Hide Table of Contents

Apply Thermostat-controlled Heat Power for Transient Thermal Study Example (VB.NET)

This example shows how to apply thermostat-controlled heat power and flux in a transient thermal study.

'---------------------------------------------------------------------------
' Preconditions:
' 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click 
'    Tools > Add-ins > SOLIDWORKS Simulation > OK).
' 2. Add the SOLIDWORKS Simulation primary interop assembly as a reference
'    (in the IDE, click Project > Add Reference > .NET > 
'    SolidWorks.Interop.cosworks > OK).
' 3. Ensure that c:\temp exists.
' 4. Ensure that the specified material library exists.
' 5. Ensure that the specified model document exists.
' 6. Open the Immediate window.
'
' Postconditions:
'  1. Opens the specified model document.
'  2. Creates Thermal_One study.
'  3. Defines default thermal study results plot and plot options.
'  4. Applies user-defined and SOLIDWORKS materials to components.
'  5. Specifies initial temperatures for assembly components.
'  6. Specifies thermostat location and the temperature range.
'  7. Prints heat flux properties to the Immediate window.
'  8. Prints radiation properties to the Immediate window.
'  9. Meshes the model.
' 10. Analyzes Thermal_One.
' 11. Creates 60 thermal plots.
' 12. Saves the Thermal1 results plot as an eDrawings document in c:\temp.
' 13. Exports Thermal_One study to the NASTRAN finite-element analysis program
'     in c:\temp.
' 14. Renames Thermal_One study to TransientThermal.
' 15. Inspect the Immediate window, the Simulation study tree,
'     and the graphics area.
'
' NOTES:
'  * To get persistent reference identifiers (PIDs) for model selections,
'    you can use pidcollector.exe or IModelDocExtension::GetPersistReference3.
'  * Solving this study can take some time. Examine the Immediate window
'    to monitor the macro's progress. Done! indicates that the macro
'    has finished.
'  * Because the assembly is used elsewhere, do not save any changes.
'--------------------------------------------------------------------
Imports SolidWorks.Interop.sldworks
Imports SolidWorks.Interop.swconst
Imports SolidWorks.Interop.cosworks
Imports System.Runtime.InteropServices
Imports System
Imports System.Diagnostics
 
Partial Class SolidWorksMacro
 
    Sub main()
 
        Dim COSMOSWORKS As COSMOSWORKS
        Dim CWObject As CwAddincallback
        Dim ActDoc As CWModelDoc
        Dim StudyMngr As CWStudyManager
        Dim Study As CWStudy
        Dim SolidMgr As CWSolidManager
        Dim SolidComp As CWSolidComponent
        Dim SolidBody As CWSolidBody
        Dim ThermalOptions As CWThermalStudyOptions
        Dim CWConv As CWConvection
        Dim CwMesh As CWMesh
        Dim CWResult As CWResults
        Dim CWMat As CWMaterial
        Dim CWTemp As CWTemperature
        Dim Part As ModelDoc2
        Dim LBCMgr As CWLoadsAndRestraintsManager
        Dim heatFlux As CWHeatFlux
        Dim CWHeatPower As CWHeatPower
        Dim rad As CWRadiation
        Dim oselect1 As Object, oselect2 As Object, oselect3 As Object
        Dim oselect4 As Object, oselect5 As Object, oselect6 As Object
        Dim oselect7 As Object, oselect8 As Object, oselect9 As Object, oselect10 As Object
        Dim therm1 As Object
        Dim var1 As Object = Nothing
        Dim var2 As Object = Nothing
        Dim var3 As Object = Nothing
        Dim var4 As Object = Nothing
        Dim var5 As Object = Nothing
        Dim var6 As Object = Nothing
        Dim var7 As Object = Nothing
        Dim var8 As Object = Nothing
        Dim var9 As Object = Nothing
        Dim var10 As Object = Nothing
        Dim var11 As Object = Nothing
        Dim Temp As Object
        Dim bApp As Boolean
        Dim selection1 As String, selection2 As String, selection3 As String
        Dim selection4 As String, selection5 As String, selection6 As String
        Dim selection7 As String, selection8 As String, selection9 As String
        Dim selection10 As String, selection11 As String
        Dim longstatus As Integer, longwarnings As Integer
        Dim errCode As Integer
        Dim el As Double, tl As Double
        Dim nStep As Integer
        Dim res As Integer
 
 
        Part = swApp.OpenDoc6("C:\Users\Public\Documents\SOLIDWORKS\SOLIDWORKS 2017\Simulation Examples\Thermal\CoffeeJar.SLDASM", swDocumentTypes_e.swDocASSEMBLY, swOpenDocOptions_e.swOpenDocOptions_Silent, "", longstatus, longwarnings)
        If Part Is Nothing Then ErrorMsg(swApp, "Failed to open document")
 
        ' Get the SOLIDWORKS Simulation add-in object
        CWObject = swApp.GetAddInObject("SldWorks.Simulation")
        If CWObject Is Nothing Then ErrorMsg(swApp, "Failed to get Simulation add-in")
 
        COSMOSWORKS = CWObject.COSMOSWORKS
        If COSMOSWORKS Is Nothing Then ErrorMsg(swApp, "Failed to get CosmosWorks object")
 
        ' Get active document
        ActDoc = COSMOSWORKS.ActiveDoc()
        If ActDoc Is Nothing Then ErrorMsg(swApp, "Failed to get active document")
 
        ' Add a default thermal study results plot
        res = ActDoc.AddDefaultThermalStudyPlot(swsThermalResultComponentTypes_e.swsThermalResultComponentTypes_TEMP, True)
 
        ' Set default thermal plot options
        ' Show maximum value annotation on the plot
        bApp = ActDoc.SetSimulationOptionToggle(swsUserPreferenceToggle_e.swsPlotAnnotationShowMaxValue, True)
        Debug.Print("Show maximum value annotation on the plot? " & ActDoc.GetSimulationOptionToggle(swsUserPreferenceToggle_e.swsPlotAnnotationShowMaxValue))
 
        ' Set sub-folder option
        bApp = ActDoc.SetSimulationOptionToggle(swsUserPreferenceToggle_e.swsResultFolderUnderSubFolder, True)
        Debug.Print("Set sub-folder option? " & ActDoc.GetSimulationOptionToggle(swsUserPreferenceToggle_e.swsResultFolderUnderSubFolder))
 
        ' Put results in C:\Users\Public\Documents\SOLIDWORKS\SOLIDWORKS 2017\Simulation Examples\Thermal\temp
        bApp = ActDoc.SetSimulationOptionStringValue(swsUserPreferenceStringValue_e.swsSolidWorksDocumentFolderSubFolderLocation, "temp")
        Debug.Print("Place results in model document sub-folder, " & ActDoc.GetSimulationOptionStringValue(swsUserPreferenceStringValue_e.swsSolidWorksDocumentFolderSubFolderLocation))
 
        ' Set boundary settings option to translucent single color
        bApp = ActDoc.SetSimulationOptionIntegerValue(swsUserPreferenceIntegerValue_e.swsPlotSettingsBoundaryOption, swsPlotBoundarySettingsOptionValue_e.swsPlotBoundaryTranslucentSingleColor)
        Debug.Print("Boundary settings option as defined in swsPlotSettingsBoundaryOption is " & ActDoc.GetSimulationOptionIntegerValue(swsUserPreferenceIntegerValue_e.swsPlotSettingsBoundaryOption))
 
        ' Set boundary color; Red 1 is 0xFF0000 in http://cloford.com/resources/colours/500col.htm
        ' Reverse the hexadecimal (&H0000FF) in the call below
        bApp = ActDoc.SetSimulationOptionIntegerValue(swsUserPreferenceIntegerValue_e.swsPlotBoundaryOptionTranslucentSingleColorSetting, &HFF)
        Debug.Print("Boundary color is " & ActDoc.GetSimulationOptionIntegerValue(swsUserPreferenceIntegerValue_e.swsPlotBoundaryOptionTranslucentSingleColorSetting))
 
        ' Set boundary transparency of translucent part color to 50%
        bApp = ActDoc.SetSimulationOptionDoubleValue(swsUserPreferenceDoubleValue_e.swsPlotBoundaryTransparency, 50.0#)
        Debug.Print("Transparency of boundary translucent part color is " & ActDoc.GetSimulationOptionDoubleValue(swsUserPreferenceDoubleValue_e.swsPlotBoundaryTransparency))
 
        ' Create new thermal study
        Debug.Print("Creating thermal study...")
 
        StudyMngr = ActDoc.StudyManager()
        If StudyMngr Is Nothing Then ErrorMsg(swApp, "No CWStudyManager object")
 
        Study = StudyMngr.CreateNewStudy3("Thermal_One", swsAnalysisStudyType_e.swsAnalysisStudyTypeThermal, swsMeshType_e.swsMeshTypeSolid, errCode)
        If Study Is Nothing Then ErrorMsg(swApp, "Failed to create study")
 
        ' Get first solid component
        SolidMgr = Study.SolidManager
        If SolidMgr Is Nothing Then ErrorMsg(swApp, "No CWSolidManager object")
 
        SolidComp = SolidMgr.GetComponentAt(0, errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to get component")
 
        SolidBody = SolidComp.GetSolidBodyAt(0, errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to get component body")
 
        ' Add material
        CWMat = SolidBody.GetDefaultMaterial
        If CWMat Is Nothing Then ErrorMsg(swApp, "No CWMaterial object")
 
        CWMat.MaterialName = "Coffee"
        Call CWMat.SetPropertyByName("DENS", 1000, 0)
        Call CWMat.SetPropertyByName("KX", 40, 0)
        Call CWMat.SetPropertyByName("C", 4200.0#, 0)
 
        errCode = SolidBody.SetSolidBodyMaterial(CWMat)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to set material")
 
        ' Get second solid component
        SolidComp = SolidMgr.GetComponentAt(1, errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to get component")
 
        SolidBody = SolidComp.GetSolidBodyAt(0, errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to get component body")
 
        ' Add material
        bApp = SolidBody.SetLibraryMaterial("C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks materials.sldmat", "Glass")
        If bApp = False Then ErrorMsg(swApp, "Failed to apply glass material")
 
        ' Get third solid component
        SolidComp = SolidMgr.GetComponentAt(2, errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to get component")
 
        SolidBody = SolidComp.GetSolidBodyAt(0, errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to get component body")
 
        ' Add material
        bApp = SolidBody.SetLibraryMaterial("C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\lang\english\sldmaterials\solidworks materials.sldmat", "Nylon 6/10")
        If bApp = False Then ErrorMsg(swApp, "Failed to apply Nylon 6/10 material")
 
        ' CoffeePot
        selection1 = "216,14,0,0,5,0,0,0,255,254,255,21,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,11,0,0,0"
        selection1 = selection1 & ",Type=1"
        StringtoArray(selection1, var1)
        oselect1 = Part.Extension.GetObjectByPersistReference3((var1), longstatus)
 
        ' Coffee
        selection2 = "216,14,0,0,5,0,0,0,255,254,255,18,67,0,111,0,102,0,102,0,101,0,101,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,12,0,0,0"
        selection2 = selection2 & ",Type=1"
        StringtoArray(selection2, var2)
        oselect2 = Part.Extension.GetObjectByPersistReference3((var2), longstatus)
 
        ' Top
        selection3 = "216,14,0,0,5,0,0,0,255,254,255,15,84,0,111,0,112,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,13,0,0,0"
        selection3 = selection3 & ",Type=1"
        StringtoArray(selection3, var3)
        oselect3 = Part.Extension.GetObjectByPersistReference3((var3), longstatus)
 
        ' Get the four coffee faces that make up the surface of coffee in the coffee pot
        ' Face 1
        selection4 = "216,14,0,0,3,0,0,0,255,254,255,18,67,0,111,0,102,0,102,0,101,0,101,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,12,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,6,99,0,111,0,102,0,102,0,101,0,101,0,126,253,47,63,11,128,255,254,255,57,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,84,0,104,0,101,0,114,0,109,0,97,0,10"
        selection4 = selection4 & "8,0,92,0,99,0,111,0,102,0,102,0,101,0,101,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,90,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,4,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,5,0,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,80,114,111,106,73,100,82,101,112,95,99,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,19,128,0,0,5,128,8,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,1,0,0,0,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,11,0,0,0,0,0,0,0,0,0"
        selection4 = selection4 & ",Type=1"
        StringtoArray(selection4, var4)
        oselect4 = Part.Extension.GetObjectByPersistReference3((var4), longstatus)
 
        ' Face 2
        selection5 = "216,14,0,0,3,0,0,0,255,254,255,18,67,0,111,0,102,0,102,0,101,0,101,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,12,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,6,99,0,111,0,102,0,102,0,101,0,101,0,126,253,47,63,11,128,255,254,255,57,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,84,0,104,0,101,0,114,0,109,0,97,0,"
        selection5 = selection5 & "108,0,92,0,99,0,111,0,102,0,102,0,101,0,101,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,90,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,4,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,6,0,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,80,114,111,106,73,100,82,101,112,95,99,0,0,5,128,8,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,1,0,0,0,19,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,11,0,0,0,0,0,0,0,0,0"
        selection5 = selection5 & ",Type=1"
        StringtoArray(selection5, var5)
        oselect5 = Part.Extension.GetObjectByPersistReference3((var5), longstatus)
 
        ' Face 3
        selection6 = "216,14,0,0,3,0,0,0,255,254,255,18,67,0,111,0,102,0,102,0,101,0,101,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,12,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,6,99,0,111,0,102,0,102,0,101,0,101,0,126,253,47,63,11,128,255,254,255,57,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,84,0,104,0,101,0,114,0,109,0,97,0,"
        selection6 = selection6 & "108,0,92,0,99,0,111,0,102,0,102,0,101,0,101,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,90,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,4,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,2,0,0,0,2,0,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,80,114,111,106,73,100,82,101,112,95,99,0,0,5,128,8,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,2,0,0,0,1,0,0,0,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,11,0,0,0,19,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,0,0,0,0,0,0"
        selection6 = selection6 & ",Type=1"
        StringtoArray(selection6, var6)
        oselect6 = Part.Extension.GetObjectByPersistReference3((var6), longstatus)
 
        ' Face 4
        selection7 = "216,14,0,0,3,0,0,0,255,254,255,18,67,0,111,0,102,0,102,0,101,0,101,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,12,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,6,99,0,111,0,102,0,102,0,101,0,101,0,126,253,47,63,11,128,255,254,255,57,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,84,0,104,0,101,0,114,0,109,0,97,0,"
        selection7 = selection7 & "108,0,92,0,99,0,111,0,102,0,102,0,101,0,101,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,90,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,4,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,2,0,0,0,1,0,0,0,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,11,0,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,80,114,111,106,73,100,82,101,112,95,99,0,0,5,128,8,0,92,0,0,0,241,69,48,63,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,2,0,0,0,1,0,0,0,21,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,16,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,0,0,0,0,0,0"
        selection7 = selection7 & ",Type=1"
        StringtoArray(selection7, var7)
        oselect7 = Part.Extension.GetObjectByPersistReference3((var7), longstatus)
 
        ' Get the selections for convection
        ' Top-outer face of coffee pot
        selection8 = "216,14,0,0,3,0,0,0,255,254,255,21,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,11,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,9,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,174,232,47,63,11,128,255,254,255,60,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,"
        selection8 = selection8 & "114,0,115,0,92,0,84,0,104,0,101,0,114,0,109,0,97,0,108,0,92,0,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,153,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,5,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,39,0,0,0,234,237,47,63,3,0,0,0,3,128,0,0,5,128,8,0,39,0,0,0,234,237,47,63,2,0,0,0,0,0,3,128,0,0,5,128,8,0,39,0,0,0,234,237,47,63,4,0,0,0,0,0,0,0,0,0"
        selection8 = selection8 & ",Type=1"
        StringtoArray(selection8, var8)
        oselect8 = Part.Extension.GetObjectByPersistReference3((var8), longstatus)
 
        ' Bottom-outer face of coffee pot
        selection9 = "216,14,0,0,3,0,0,0,255,254,255,21,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,11,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,9,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,174,232,47,63,11,128,255,254,255,60,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,"
        selection9 = selection9 & "0,114,0,115,0,92,0,84,0,104,0,101,0,114,0,109,0,97,0,108,0,92,0,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,153,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,5,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,39,0,0,0,234,237,47,63,2,0,0,0,3,128,0,0,5,128,8,0,39,0,0,0,234,237,47,63,3,0,0,0,0,0,3,128,0,0,5,128,8,0,39,0,0,0,234,237,47,63,1,0,0,0,0,0,0,0,0,0"
        selection9 = selection9 & ",Type=1"
        StringtoArray(selection9, var9)
        oselect9 = Part.Extension.GetObjectByPersistReference3((var9), longstatus)
 
        ' Thermostat sensor located on the top of the bottom face of the coffee pot
        selection10 = "216,14,0,0,3,0,0,0,255,254,255,18,67,0,111,0,102,0,102,0,101,0,101,0,45,0,49,0,64,0,99,0,111,0,102,0,102,0,101,0,101,0,106,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,12,0,0,0,255,255,1,0,13,0,109,111,86,101,114,116,101,120,82,101,102,95,99,255,255,255,255,255,255,255,255,8,0,0,0,0,2,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,18,0,109,111,80,76,105,110,101,80,114,111,106,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,"
        selection10 = selection10 & "1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,6,99,0,111,0,102,0,102,0,101,0,101,0,126,253,47,63,11,128,255,254,255,57,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,114,0,115,0,92,0,84,0,104,"
        selection10 = selection10 & "0,101,0,114,0,109,0,97,0,108,0,92,0,99,0,111,0,102,0,102,0,101,0,101,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,90,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,4,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,92,0,0,0,241,69,48,63,255,255,1,0,18,0,109,111,80,76,105,110,101,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,90,0,0,0,219,69,48,63,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,"
        selection10 = selection10 & "110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,1,0,0,0,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,17,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,3,128,0,0,5,128,8,0,92,0,0,0,241,69,48,63,14,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,17,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,2,0,0,0,1,0,0,0,3,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,17,128,0,0,5,128,8,0,88,0,0,0,"
        selection10 = selection10 & "135,69,48,63,5,0,0,0,1,0,0,0,14,128,0,0,5,128,8,0,92,0,0,0,241,69,48,63,14,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,17,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,5,0,0,0,14,128,0,0,5,128,8,0,92,0,0,0,241,69,48,63,14,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,17,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,2,0,0,0,1,0,0,0,14,128,0,0,5,128,8,0,92,0,0,0,241,69,48,63,14,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,17,128,0,0,"
        selection10 = selection10 & "5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,2,0,0,0,2,0,0,0,14,128,0,0,5,128,8,0,92,0,0,0,241,69,48,63,14,128,0,0,5,128,8,0,90,0,0,0,219,69,48,63,17,128,0,0,5,128,8,0,88,0,0,0,135,69,48,63,5,0,0,0,1,0,0,0,6,0,0,0,4,0,0,0,0,0,0,0"
        selection10 = selection10 & ",Type=1"
        StringtoArray(selection10, var10)
        therm1 = Part.Extension.GetObjectByPersistReference3((var10), longstatus)
 
        ' Face to which to apply heat power and flux
        selection11 = "216,14,0,0,3,0,0,0,255,254,255,21,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,45,0,49,0,64,0,67,0,111,0,102,0,102,0,101,0,101,0,74,0,97,0,114,0,4,0,0,0,16,0,0,0,1,0,0,0,1,0,0,0,11,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,3,0,0,0,0,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,14,0,109,111,79,98,106,70,105,108,101,68,101,102,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,9,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,174,232,47,63,11,128,255,254,255,60,67,0,58,0,92,0,67,0,79,0,83,0,77,0,79,0,83,0,68,0,111,0,99,0,115,0,92,0,69,0,120,0,97,0,109,0,112,0,108,0,101,0,115,0,95,0,102,0,111,0,114,0,67,0,117,0,115,0,116,0,111,0,109,0,101,0,"
        selection11 = selection11 & "114,0,115,0,92,0,84,0,104,0,101,0,114,0,109,0,97,0,108,0,92,0,67,0,111,0,102,0,102,0,101,0,101,0,80,0,111,0,116,0,46,0,83,0,76,0,68,0,80,0,82,0,84,0,153,14,28,65,0,0,0,0,2,0,1,0,0,0,0,0,0,0,5,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,0,0,0,0,39,0,0,0,234,237,47,63,1,0,0,0,3,128,0,0,5,128,8,0,39,0,0,0,234,237,47,63,2,0,0,0,0,0,0,0,0,0"
        selection11 = selection11 & ",Type=1"
        StringtoArray(selection11, var11)
        oselect10 = Part.Extension.GetObjectByPersistReference3((var11), longstatus)
 
        ' Create arrays
        Dim varArray1 As Object() = {oselect1, oselect3}
        Dim varArray2 As Object() = {oselect2}
        Dim varArray3 As Object() = {oselect4, oselect5, oselect6, oselect7}
        Dim varArray4 As Object() = {oselect8, oselect9}
        Dim varArray5 As Object() = {therm1}
        Dim varArray6 As Object() = {oselect10}
 
 
        ' Set transient thermal study options
        Debug.Print("Setting transient thermal study options...")
        ThermalOptions = Study.ThermalStudyOptions
        If ThermalOptions Is Nothing Then ErrorMsg(swApp, "No CWThermalStudyOptions object")
        ThermalOptions.CheckFlowConvectionCoef = 0
        ThermalOptions.SolutionType = 0
        ThermalOptions.SolverType = 2
        ThermalOptions.TotalTime = 3600
        ThermalOptions.TimeIncrement = 60
 
        ' Apply initial temperature to coffee pot and top
        Debug.Print("Applying initial temperature to coffee pot and top...")
        LBCMgr = Study.LoadsAndRestraintsManager
        If LBCMgr Is Nothing Then ErrorMsg(swApp, "No CWLoadsAndRestraintsManager object")
 
        CWTemp = LBCMgr.AddTemperature((varArray1), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to add temperature load")
 
        CWTemp.TemperatureBeginEdit()
        CWTemp.TemperatureType = 0
        CWTemp.Unit = 1
        CWTemp.TemperatureValue = 72
 
        errCode = CWTemp.TemperatureEndEdit
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to edit temperature load")
 
        ' Apply initial temperature to coffee
        Debug.Print("Applying initial temperature to coffee...")
        CWTemp = LBCMgr.AddTemperature((varArray2), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to add temperature load")
 
        CWTemp.TemperatureBeginEdit()
        CWTemp.TemperatureType = 0
        CWTemp.Unit = 1
        CWTemp.TemperatureValue = 195
 
        errCode = CWTemp.TemperatureEndEdit
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to edit temperature load")
 
        ' Create convection for coffee component
        Debug.Print("Creating convection for coffee component...")
        CWConv = LBCMgr.AddConvection((varArray3), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to add convection load")
 
        CWConv.ConvectionBeginEdit()
        CWConv.Unit = 1
        CWConv.ConvectionCoefficient = 0.0000085
        CWConv.BulkAmbientTemperature = 72
 
        errCode = CWConv.ConvectionEndEdit
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to edit convection load")
 
        ' Create convection for coffee pot component
        Debug.Print("Creating convection for coffee pot component...")
        CWConv = LBCMgr.AddConvection((varArray4), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to add convection")
 
        CWConv.ConvectionBeginEdit()
        CWConv.Unit = 1
        CWConv.ConvectionCoefficient = 0.000061
        CWConv.BulkAmbientTemperature = 72
 
        errCode = CWConv.ConvectionEndEdit
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to edit convection load")
 
        ' Add heat power
        Debug.Print("Creating heat power for face...")
        CWHeatPower = LBCMgr.AddHeatPower((varArray6), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to add heat power")
        CWHeatPower.HeatPowerBeginEdit()
        CWHeatPower.Unit = 0
        CWHeatPower.HPValue = 2000
        CWHeatPower.ReverseDirection = 0
        Debug.Print("  Setting thermostat to a vertex...")
        CWHeatPower.IncludeThermostat = True
        CWHeatPower.SetThermostat(therm1)
        CWHeatPower.ThermostatUnits = 1
        CWHeatPower.SetCutOffTemperatures(190, 200)
        errCode = CWHeatPower.HeatPowerEndEdit
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to edit heat power")
 
        ' Add heat flux
        Debug.Print("Creating heat flux for face...")
        heatFlux = LBCMgr.AddHeatFlux((varArray6), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to add heat flux")
        heatFlux.HeatFluxBeginEdit()
        heatFlux.HFValue = 100
        heatFlux.SetThermostat(therm1)
        errCode = heatFlux.HeatFluxEndEdit
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to edit heat flux")
        Dim dval1 As Double, dval2 As Double
        heatFlux.GetCutOffTemperatures(dval1, dval2)
        Debug.Print("  Thermostat lower-bound temperature: " & dval1)
        Debug.Print("  Thermostat upper-bound temperature: " & dval2)
        Debug.Print("  Heat flux: " & heatFlux.HFValue)
        Debug.Print("    Reverse direction? (0 = no, 1 = yes) " & heatFlux.ReverseDirection)
        Debug.Print("  Include thermostat effects? (0 = no, 1 = yes) " & heatFlux.IncludeThermostat)
        Debug.Print("  Thermostat units as defined in swsTemperatureUnit_e: " & heatFlux.ThermostatUnits)
        Debug.Print("  Use temperature curve? (0 = no, 1 = yes) " & heatFlux.UseTemperatureCurve)
        Debug.Print("  Use time curve? (0 = no, 1 = yes) " & heatFlux.UseTimeCurve)
        Debug.Print("  Units as defined in swsTemperatureUnit_e: " & heatFlux.Unit)
 

        ' Add radiation
        Debug.Print("Creating radiation for face...")
        rad = LBCMgr.AddRadiation(swsRadiationType_e.swsRadiationTypeSurfaceToAmbient, (varArray6), errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to add radiation")
        rad.RadiationBeginEdit()
        rad.Emmisivity = 0.5
        rad.ViewFactor = 0.5
        errCode = rad.RadiationEndEdit
        Debug.Print("  Ambient temperature: " & rad.AmbientTemperature)
        Debug.Print("  Emissivity: " & rad.Emmisivity)
        Debug.Print("  View factor: " & rad.ViewFactor)
        Debug.Print("  System as defined in swsRadiationOpenSystem_e: " & rad.OpenSystem)
        Debug.Print("  Use temperature curve? (0 = no, 1 = yes) " & rad.UseTemperatureCurve)
        Debug.Print("  Use time curve? (0 = no, 1 = yes) " & rad.UseTimeCurve)
        Debug.Print("  Units as defined in swsTemperatureUnit_e: " & rad.Unit)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to edit radiation")
 
        ' Mesh model
        Debug.Print("Creating mesh...")
        CwMesh = Study.Mesh
        If CwMesh Is Nothing Then ErrorMsg(swApp, "No CWMesh object")
 
        CwMesh.Quality = 1
        Call CwMesh.GetDefaultElementSizeAndTolerance(0, el, tl)
        errCode = Study.CreateMesh(0, el, tl)
        If errCode <> 0 Then ErrorMsg(swApp, "Failed to create mesh")
 
        ' Analyze study
        Debug.Print("Running analysis...")
        errCode = Study.RunAnalysis
        If errCode <> 0 Then ErrorMsg(swApp, "Analysis failed with error code as defined in swsRunAnalysisError_e: " & errCode)
 
        Debug.Print("Getting results...")
        CWResult = Study.Results
        If CWResult Is Nothing Then ErrorMsg(swApp, "No CWResults object")
 
        ' Get temperature at vertex
        Debug.Print("Getting temperature at vertex...")
        nStep = CWResult.GetMaximumAvailableSteps
        Temp = CWResult.GetThermalForEntities(0, nStep, Nothing, (varArray5), 2, errCode)
        If errCode <> 0 Then ErrorMsg(swApp, "No temperature result")
 
        ' Save Thermal1 plot as eDrawing
        CWResult.SavePlotsAseDrawings("c:\temp", "ThermalPlot", "Thermal1")
 
        ' Export this study to the NASTRAN finite-element analysis program
        res = Study.ExportSimulationStudy("c:\temp", "ThermalStudyExport", swsNastranExportOption_e.swsNastranExportOption_LongFixed, 0, 0, swsStudyExportOption_e.swsStudyExportOption_Nastran, swsNastranExportUnit_e.swsNastranExportUnit_IPS)
 
        ' Rename the study
        res = StudyMngr.RenameStudyFromName("Thermal_One", "TransientThermal")
 
        Debug.Print("Done!")
 
    End Sub
 
    Sub ErrorMsg(ByVal swApp As SldWorks, ByVal Message As String)
        swApp.SendMsgToUser2(Message, 0, 0)
        swApp.RecordLine("'*** WARNING - General")
        swApp.RecordLine("'*** " & Message)
        swApp.RecordLine("")
 
    End Sub
 
    Sub StringtoArray(ByVal inputSTR As String, ByRef varEntity As Object)
 
        Dim PID() As Byte
        Dim i As Integer
 
        varEntity = Split(inputSTR, ",")
        ReDim PID(UBound(varEntity))
        For i = 0 To (UBound(varEntity) - 1)
            PID(i) = varEntity(i)
        Next i
 
        varEntity = PID
 
    End Sub
 
 
 
    ''' <summary>
    ''' The SldWorks swApp variable is pre-assigned for you.
    ''' </summary>
    Public swApp As SldWorks
 
 
End Class
 

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Apply Thermostat-controlled Heat Power for Transient Thermal Study Example (VB.NET)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2017 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.62