Hide Table of Contents

Create and Edit Edge Weld Connector Example (C#)

This example shows how to create and edit an edge weld connector.

//----------------------------------------------------------------------------
// Preconditions:
// 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click 
//    Tools > Add-ins > SOLIDWORKS Simulation > OK).
// 2. Add the SOLIDWORKS Simulation primary interop assembly as a reference
//    (in the IDE, click Project > Add Reference > .NET > 
//    SolidWorks.Interop.cosworks > OK).
// 3. Open public_documents\tutorial\api\tjoint.sldprt.
//
// Postconditions: Creates and modifies Edge Weld Connector-3.
//
// NOTE: Because the model is used elsewhere, do not save changes.
// ---------------------------------------------------------------------------
using Microsoft.VisualBasic;
using System;
using System.Collections;
using System.Collections.Generic;
using System.Data;
using System.Diagnostics;
using SolidWorks.Interop.sldworks;
using SolidWorks.Interop.swconst;
using SolidWorks.Interop.cosworks;
using System.Runtime.InteropServices;
namespace EdgeWeldConnector_CSharp.csproj
{
    partial class SolidWorksMacro
    {
 
        public void Main()
        {
            ModelDoc2 Part = default(ModelDoc2);
            int errCode = 0;
            CosmosWorks COSMOSWORKS = default(CosmosWorks);
            CwAddincallback CWAddinCallBack = default(CwAddincallback);
            CWModelDoc ActDoc = default(CWModelDoc);
            CWStudyManager StudyMngr = default(CWStudyManager);
            CWStudy Study = default(CWStudy);
            CWLoadsAndRestraintsManager LoadAndRestraintMngr = default(CWLoadsAndRestraintsManager);
            CWEdgeWeldConnector theCurrentLoad = default(CWEdgeWeldConnector);
            CWEdgeWeldConnector theNewLoad = default(CWEdgeWeldConnector);
            byte[] var1 = null;
            byte[] var2 = null;
            byte[] var4 = null;
            object pDisp1 = null;
            object pDisp2 = null;
            object pDisp4 = null;
            object FirstFace = null;
            object SecondFace = null;
            int NWeakMaterial = 0;
            double DUltimateTensileStrength = 0;
            int NTensileStrengthUnit = 0;
            double DCorrelationFactor = 0;
            double DPartialSafetyFactor = 0;
            bool BIsEstimatedWeldSize = false;
            int nElectrodeMaterial = 0;
            double dWeldStrength = 0;
            int nWeldStrengthUnit = 0;
            int nFOSOption = 0;
            double dFOS = 0;
            bool bEstimatedWeldSize = false;
            double dEstimatedWeldSize = 0;
            int nEstimatedWeldSizeUnit = 0;
            int EdgeWeldType = 0;
            bool WeldOrientation = false;
            bool InducedBendingMomentIncluded = false;
            int CodeType = 0;
            ArrayList PIDCollection = new ArrayList();
 
            CWAddinCallBack = (CwAddincallback)swApp.GetAddInObject("CosmosWorks.CosmosWorks");
            COSMOSWORKS = CWAddinCallBack.CosmosWorks;
            ActDoc = (CWModelDoc)COSMOSWORKS.ActiveDoc;
            StudyMngr = (CWStudyManager)ActDoc.StudyManager;
            StudyMngr.ActiveStudy = 0;
            Study = StudyMngr.GetStudy(StudyMngr.ActiveStudy);
            LoadAndRestraintMngr = Study.LoadsAndRestraintsManager;
 
            PIDCollection = PIDInitializer();
 
            Part = (ModelDoc2)swApp.ActiveDoc;
 
            SelectByPID("selection1", PIDCollection, ref var1);
            SelectByPID("selection2", PIDCollection, ref var2);
            SelectByPID("selection4", PIDCollection, ref var4);
 
            pDisp1 = (object)Part.Extension.GetObjectByPersistReference((var1)); //face
            pDisp2 = (object)Part.Extension.GetObjectByPersistReference((var2)); //face
            pDisp4 = (object)Part.Extension.GetObjectByPersistReference((var4)); //edge
 
            theCurrentLoad = LoadAndRestraintMngr.GetEdgeWeldConnector(5, errCode);
            if (errCode != 0) 
                ErrorMsg(swApp, "Failed to get edge weld connector");
 
            object[] varArray9 = { pDisp4 };
            theNewLoad = LoadAndRestraintMngr.AddEdgeWeldConnector(pDisp1, pDisp2, varArray9, 0, 0, out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to add edge weld connector");
       
 
            errCode = theNewLoad.SetEdgeWeldType(3);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set edge weld type");
 
            EdgeWeldType = theNewLoad.GetEdgeWeldType(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get edge weld type");
 
            FirstFace = theNewLoad.GetFirstFace(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get Face Set1");
 
            SecondFace = theNewLoad.GetSecondFace(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get Face Set2");
 
            errCode = theNewLoad.ReplaceFacesThenAutoGenerateTouchingEdges(0, pDisp1, pDisp2);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to replace faces and find touching edges");
 
            object[] var = (object[])theNewLoad.GetEdgeList(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get edge list");
 
            object[] varArray = { var[0] };
            errCode = theNewLoad.ReplaceFacesAndEdges(0, pDisp1, pDisp2, varArray);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to replace faces and edges");
 
            object[] varArray2 = { var[1] };
            errCode = theNewLoad.AddEdges(0, varArray2);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to add edges");
 
            errCode = theNewLoad.RemoveEdges(0, varArray);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to remove edges");
 
            errCode = theNewLoad.SetEdgeWeldType(3);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set edge weld type");
 
            errCode = theNewLoad.SetWeldOrientation(true);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set whether to show weld orientation");
 
            WeldOrientation = theNewLoad.IsWeldOrientation(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get whether to show weld orientation");
 
            errCode = theNewLoad.SetInducedBendingMomentIncluded(true);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set whether induced bending moment is included");
 
            InducedBendingMomentIncluded = theNewLoad.IsInducedBendingMomentIncluded(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get whether induced bending moment is included");
 
            CodeType = theNewLoad.GetCodeType(out errCode);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get weld code");
 
            //American Standard weld sizing
            errCode = theNewLoad.SetCodeType(0);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set American Standard weld code");
 
            errCode = theNewLoad.SetWeldSizingSettingUS(4, 100.1, 4, 1, 1, true, 98, 0);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set American Standard weld sizing");
 
            errCode = theNewLoad.GetWeldSizingSettingUS(out nElectrodeMaterial, out dWeldStrength, out nWeldStrengthUnit, out nFOSOption, out dFOS, out bEstimatedWeldSize, out dEstimatedWeldSize, out nEstimatedWeldSizeUnit);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get American Standard weld sizing");
 
            //European weld sizing
            errCode = theNewLoad.SetCodeType(1);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set european weld code");
 
            errCode = theNewLoad.SetWeldSizingSettingEuro(1, 155.2, 4, 1, 1, true, 98, 0);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to set european weld sizing");
 
            errCode = theNewLoad.GetWeldSizingSettingEuro(out NWeakMaterial, out DUltimateTensileStrength, out NTensileStrengthUnit, out DCorrelationFactor, out DPartialSafetyFactor, out BIsEstimatedWeldSize, out dEstimatedWeldSize, out nEstimatedWeldSizeUnit);
            if (errCode != 0)
                ErrorMsg(swApp, "Failed to get european weld sizing");
 
        }
 
 
        private void SelectByPID(string PIDName, ArrayList PIDCollection, ref byte[] varEntity)
        {
            // Select by PID 
            byte[] PID = null;
            string[] PIDVariant = null;
            string PIDString = null;
            int i = 0;
 
            // Get string from array
            PIDString = "";
            switch (PIDName)
            {
                case "selection1":
                    PIDString = (string)PIDCollection[0];
                    break;
                case "selection2":
                    PIDString = (string)PIDCollection[1];
                    break;
                case "selection3":
                    PIDString = (string)PIDCollection[2];
                    break;
                default:
                    break;
            }
 
            // Parse the string into an array 
            PIDVariant = PIDString.Split(new char[] { ',' });
 
            // Convert string array to byte array
            int sizeArray = PIDVariant.Length;
            PID = new byte[sizeArray];
            for (i = 0; i < PIDVariant.Length - 1; i++)
            {
                PID[i] = Convert.ToByte(PIDVariant[i]);
            }
            varEntity = PID;
        }
 
        public ArrayList PIDInitializer()
        {
 
            ArrayList PIDCollection = new ArrayList();
 
            string selection1 = null;
            string selection2 = null;
            string selection4 = null;
 
            //Faces
            

            selection1 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,6,0,0,0,4,2,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,0,";
            selection1 = selection1 + "0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,45,0,0,0,80,132,43,72,1,0,0,0,255,255,1,0,16,0,109,111,84,111,112,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,12,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,255,255,1,0,19,0,109,111,66,111,116,116,111,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0";
            selection1 = selection1 + ",Type=1;

            selection2 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,4,2,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,";
            selection2 = selection2 + "0,0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,26,0,0,0,36,131,43,72,1,0,0,0,255,255,1,0,16,0,109,111,84,111,112,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,26,0,0,0,36,131,43,72,1,0,0,0,0,0,255,255,1,0,19,0,109,111,66,111,116,116,111,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,26,0,0,0,36,131,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0";
            selection2 = selection2 + ",Type=1";


 
            //Edge
            

            selection4 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,69,100,103,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,4,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,";
            selection4 = selection4 + "0,0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,26,0,0,0,36,131,43,72,1,0,0,0,0,0,255,255,1,0,21,0,109,111,76,101,102,116,84,114,105,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,1,0,0,0,12,128,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,1,0,0,0,12,128,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0";
            selection4 = selection4 + ",Type=1";


            //Store constants in a collection

            PIDCollection.Add(selection1);
            PIDCollection.Add(selection2);
            PIDCollection.Add(selection4);
 
            return PIDCollection;
        }
 
        private void ErrorMsg(SldWorks SwApp, string Message)
        {
            SwApp.SendMsgToUser2(Message, 0, 0);
            SwApp.RecordLine("'*** WARNING - General");
            SwApp.RecordLine("'*** " + Message);
            SwApp.RecordLine("");
        }
 
        public SldWorks swApp;
 
    }
}
 
 

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Create and Edit Edge Weld Connector Example (C#)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2017 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.24