Hide Table of Contents

Create and Edit Edge Weld Connector Example (VBA)

This example shows how to create and edit an edge weld connector.

'----------------------------------------------------------------------------
' Preconditions:
' 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click
'    Tools > Add-ins > SOLIDWORKS Simulation > OK).
' 2. Add the SOLIDWORKS Simulation type library as a reference (in the IDE,
'    click Tools > References > SOLIDWORKS Simulation version type library).
' 3. Open public_documents\tutorial\api\tjoint.sldprt.
'
' Postconditions: Creates and modifies Edge Weld Connector-3.
'
' NOTE: Because the model is used elsewhere, do not save changes.
' ---------------------------------------------------------------------------
Option Explicit

Sub main()

    Dim SwApp           As SldWorks.SldWorks
    Dim Part            As SldWorks.ModelDoc2
    Dim errCode         As Long
    Dim COSMOSWORKS     As CosmosWorksLib.COSMOSWORKS
    Dim CWAddinCallBack As CosmosWorksLib.CWAddinCallBack
    Dim ActDoc          As CosmosWorksLib.CWModelDoc
    Dim StudyMngr       As CosmosWorksLib.CWStudyManager
    Dim Study           As CosmosWorksLib.CWStudy
    Dim LoadAndRestraintMngr As CosmosWorksLib.CWLoadsAndRestraintsManager
    Dim theCurrentLoad  As CosmosWorksLib.CWEdgeWeldConnector
    Dim theNewLoad      As CosmosWorksLib.CWEdgeWeldConnector
    Dim var1 As Variant, var2 As Variant
    Dim var4 As Variant
    Dim pDisp1 As Object, pDisp2 As Object, pDisp4 As Object
    Dim varArray9 As Variant, varArray2 As Variant, varArray As Variant, var As Variant
    Dim FirstFace As Object, SecondFace As Object
    Dim NWeakMaterial As Long
    Dim DUltimateTensileStrength As Double
    Dim NTensileStrengthUnit As Long
    Dim DCorrelationFactor As Double
    Dim DPartialSafetyFactor As Double
    Dim BIsEstimatedWeldSize As Boolean
    Dim nElectrodeMaterial As Long
    Dim dWeldStrength As Double
    Dim nWeldStrengthUnit As Long
    Dim nFOSOption As Long
    Dim dFOS As Double
    Dim bEstimatedWeldSize As Boolean
    Dim dEstimatedWeldSize As Double
    Dim nEstimatedWeldSizeUnit As Long
    Dim EdgeWeldType As Long
    Dim WeldOrientation As Long
    Dim InducedBendingMomentIncluded As Long
    Dim CodeType As Long
    Dim PIDCollection As New Collection
   

    Set SwApp = Application.SldWorks
    Set CWAddinCallBack = SwApp.GetAddInObject("CosmosWorks.CosmosWorks")
    Set COSMOSWORKS = CWAddinCallBack.COSMOSWORKS
    Set ActDoc = COSMOSWORKS.ActiveDoc()
    Set StudyMngr = ActDoc.StudyManager()
    StudyMngr.ActiveStudy = 0
    Set Study = StudyMngr.GetStudy(StudyMngr.ActiveStudy)
    Set LoadAndRestraintMngr = Study.LoadsAndRestraintsManager
   

    Set PIDCollection = PIDInitializer()

    Set Part = SwApp.ActiveDoc
   

    SelectByPID "selection1", PIDCollection, var1
    SelectByPID "selection2", PIDCollection, var2
    SelectByPID "selection4", PIDCollection, var4
  

    Set pDisp1 = Part.Extension.GetObjectByPersistReference3((var1), errCode) 'face
    Set pDisp2 = Part.Extension.GetObjectByPersistReference3((var2), errCode) 'face
    Set pDisp4 = Part.Extension.GetObjectByPersistReference3((var4), errCode) 'edge

    Set theCurrentLoad = LoadAndRestraintMngr.GetEdgeWeldConnector(5, errCode)
    If theCurrentLoad Is Nothing Then ErrorMsg SwApp, "Failed to get edge weld connector"
   

    varArray9 = Array(pDisp4)
    Set theNewLoad = LoadAndRestraintMngr.AddEdgeWeldConnector(pDisp1, pDisp2, varArray9, 0, False, errCode)
    If theNewLoad Is Nothing Then ErrorMsg SwApp, "Failed to add edge weld connector"
   

    errCode = theNewLoad.SetEdgeWeldType(3)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set edge weld type"
   

    EdgeWeldType = theNewLoad.GetEdgeWeldType(errCode)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get edge weld type"

    Set FirstFace = theNewLoad.GetFirstFace(errCode)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get Face Set1"
   

    Set SecondFace = theNewLoad.GetSecondFace(errCode)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get Face Set2"
   

    errCode = theNewLoad.ReplaceFacesThenAutoGenerateTouchingEdges(0, pDisp1, pDisp2)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to replace faces and find touching edges"
   

    var = theNewLoad.GetEdgeList(errCode)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get edge list"
   

    varArray = Array(var(0))
    errCode = theNewLoad.ReplaceFacesAndEdges(0, pDisp1, pDisp2, varArray)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to replace faces and edges"
   

    varArray2 = Array(var(1))
    errCode = theNewLoad.AddEdges(0, varArray2)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to add edges"
   

    errCode = theNewLoad.RemoveEdges(0, varArray)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to remove edges"
   

    errCode = theNewLoad.SetEdgeWeldType(3)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set edge weld type"
   

    errCode = theNewLoad.SetWeldOrientation(True)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set whether to show weld orientation"
   

    WeldOrientation = theNewLoad.IsWeldOrientation(errCode)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get whether to show weld orientation"
   

    errCode = theNewLoad.SetInducedBendingMomentIncluded(True)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set whether induced bending moment is included"
   

    InducedBendingMomentIncluded = theNewLoad.IsInducedBendingMomentIncluded(errCode)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get whether induced bending moment is included"
 

    CodeType = theNewLoad.GetCodeType(errCode)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get weld code"
   

    'American Standard weld sizing
    errCode = theNewLoad.SetCodeType(0)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set American Standard weld code"
   

    errCode = theNewLoad.SetWeldSizingSettingUS(4, 100.1, 4, 1, 1, True, 98, 0)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set American Standard weld sizing"
   

    errCode = theNewLoad.GetWeldSizingSettingUS(nElectrodeMaterial, dWeldStrength, nWeldStrengthUnit, nFOSOption, dFOS, bEstimatedWeldSize, dEstimatedWeldSize, nEstimatedWeldSizeUnit)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get American Standard weld sizing"

    'European weld sizing
    errCode = theNewLoad.SetCodeType(1)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set european weld code"
   

    errCode = theNewLoad.SetWeldSizingSettingEuro(1, 155.2, 4, 1, 1, True, 98, 0)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to set european weld sizing"
   

    errCode = theNewLoad.GetWeldSizingSettingEuro(NWeakMaterial, DUltimateTensileStrength, NTensileStrengthUnit, DCorrelationFactor, DPartialSafetyFactor, BIsEstimatedWeldSize, dEstimatedWeldSize, nEstimatedWeldSizeUnit)
    If errCode <> 0 Then ErrorMsg SwApp, "Failed to get european weld sizing"

End Sub

Sub SelectByPID(PIDName As String, PIDCollection As Collection, varEntity As Variant)
   

    Dim SelObj As Object
    Dim PID() As Byte
    Dim PIDVariant As Variant
    Dim PIDString As String
    Dim i As Integer
   

    'Get the string from the collection
    PIDString = ""
    PIDString = PIDCollection.Item(PIDName)
   

    'Parse the string into an array
    PIDVariant = Split(PIDString, ",")
    ReDim PID(UBound(PIDVariant))
   

    'Change to a byte array
    For i = 0 To (UBound(PIDVariant) - 1)
        PID(i) = PIDVariant(i)
    Next i
        varEntity = PID
    Set SelObj = Nothing
End Sub

Function PIDInitializer() As Collection
   

    Dim PIDCollection As New Collection
   

    Dim selection1 As String
    Dim selection2 As String

    'Faces
    selection1 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,6,0,0,0,4,2,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,0,"
    selection1 = selection1 & "0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,45,0,0,0,80,132,43,72,1,0,0,0,255,255,1,0,16,0,109,111,84,111,112,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,12,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,255,255,1,0,19,0,109,111,66,111,116,116,111,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    selection1 = selection1 & ",Type=1"

    selection2 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,4,2,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,"
    selection2 = selection2 & "0,0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,26,0,0,0,36,131,43,72,1,0,0,0,255,255,1,0,16,0,109,111,84,111,112,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,26,0,0,0,36,131,43,72,1,0,0,0,0,0,255,255,1,0,19,0,109,111,66,111,116,116,111,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,26,0,0,0,36,131,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    selection2 = selection2 & ",Type=1"

    'Store constants in a collection.
    PIDCollection.Add selection1, "selection1"
    PIDCollection.Add selection2, "selection2"
   

    Dim selection4 As String

    'Edge
    selection4 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,69,100,103,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,4,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,"
    selection4 = selection4 & "0,0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,26,0,0,0,36,131,43,72,1,0,0,0,0,0,255,255,1,0,21,0,109,111,76,101,102,116,84,114,105,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,1,0,0,0,12,128,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,1,0,0,0,12,128,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    selection4 = selection4 & ",Type=1"

    'Store constants in a collection.
    PIDCollection.Add selection4, "selection4"

    Set PIDInitializer = PIDCollection


End Function

Sub ErrorMsg(SwApp As SldWorks.SldWorks, Message As String)
    SwApp.SendMsgToUser2 Message, 0, 0
    SwApp.RecordLine "'*** WARNING - General"
    SwApp.RecordLine "'*** " & Message
    SwApp.RecordLine ""
End Sub

 

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Create and Edit Edge Weld Connector Example (VBA)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2017 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.62