Hide Table of Contents

Create and Edit Edge Weld Connector Example (VB.NET)

This example shows how to create and edit an edge weld connector.

'----------------------------------------------------------------------------
' Preconditions:
' 1. Add the SOLIDWORKS Simulation as an add-in (in SOLIDWORKS, click 
'    Tools > Add-ins > SOLIDWORKS Simulation > OK).
' 2. Add the SOLIDWORKS Simulation primary interop assembly as a reference
'    (in the IDE, click Project > Add Reference > .NET > 
'    SolidWorks.Interop.cosworks > OK).
' 3. Open public_documents\tutorial\api\tjoint.sldprt.
'
' Postconditions: Creates and modifies Edge Weld Connector-3.
'
' NOTE: Because the model is used elsewhere, do not save changes.
' ---------------------------------------------------------------------------
Imports SolidWorks.Interop.sldworks
Imports SolidWorks.Interop.swconst
Imports SolidWorks.Interop.cosworks
Imports System.Runtime.InteropServices
Imports System
 
Partial Class SolidWorksMacro
 
    Sub main()
 
        Dim Part As ModelDoc2
        Dim errCode As Integer
        Dim COSMOSWORKS As CosmosWorks
        Dim CWAddinCallBack As CwAddincallback
        Dim ActDoc As CWModelDoc
        Dim StudyMngr As CWStudyManager
        Dim Study As CWStudy
        Dim LoadAndRestraintMngr As CWLoadsAndRestraintsManager
        Dim theCurrentLoad As CWEdgeWeldConnector
        Dim theNewLoad As CWEdgeWeldConnector
        Dim var1 As Object = Nothing
        Dim var2 As Object = Nothing
        Dim var4 As Object = Nothing
        Dim pDisp1 As Object, pDisp2 As Object, pDisp4 As Object
        Dim FirstFace As Object, SecondFace As Object
        Dim NWeakMaterial As Integer
        Dim DUltimateTensileStrength As Double
        Dim NTensileStrengthUnit As Integer
        Dim DCorrelationFactor As Double
        Dim DPartialSafetyFactor As Double
        Dim BIsEstimatedWeldSize As Boolean
        Dim nElectrodeMaterial As Integer
        Dim dWeldStrength As Double
        Dim nWeldStrengthUnit As Integer
        Dim nFOSOption As Integer
        Dim dFOS As Double
        Dim bEstimatedWeldSize As Boolean
        Dim dEstimatedWeldSize As Double
        Dim nEstimatedWeldSizeUnit As Integer
        Dim EdgeWeldType As Integer
        Dim WeldOrientation As Integer
        Dim InducedBendingMomentIncluded As Integer
        Dim CodeType As Integer
        Dim PIDCollection As New Collection
 
        CWAddinCallBack = SwApp.GetAddInObject("CosmosWorks.CosmosWorks")
        COSMOSWORKS = CWAddinCallBack.COSMOSWORKS
        ActDoc = COSMOSWORKS.ActiveDoc()
        StudyMngr = ActDoc.StudyManager()
        StudyMngr.ActiveStudy = 0
        Study = StudyMngr.GetStudy(StudyMngr.ActiveStudy)
        LoadAndRestraintMngr = Study.LoadsAndRestraintsManager
 
        PIDCollection = PIDInitializer()
 
        Part = SwApp.ActiveDoc
 
        SelectByPID("selection1", PIDCollection, var1)
        SelectByPID("selection2", PIDCollection, var2)
        SelectByPID("selection4", PIDCollection, var4)
 
        pDisp1 = Part.Extension.GetObjectByPersistReference((var1)) 'face
        pDisp2 = Part.Extension.GetObjectByPersistReference((var2)) 'face
        pDisp4 = Part.Extension.GetObjectByPersistReference((var4)) 'edge
 
        theCurrentLoad = LoadAndRestraintMngr.GetEdgeWeldConnector(5, errCode)
        If theCurrentLoad Is Nothing Then ErrorMsg(swApp, "Failed to get edge weld connector")
 
        Dim varArray9 As Object() = {pDisp4}
        theNewLoad = LoadAndRestraintMngr.AddEdgeWeldConnector(pDisp1, pDisp2, (varArray9), 0, 0, errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to add edge weld connector")
 
        errCode = theNewLoad.SetEdgeWeldType(3)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set edge weld type")
 
        EdgeWeldType = theNewLoad.GetEdgeWeldType(errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get edge weld type")
 
        FirstFace = theNewLoad.GetFirstFace(errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get Face Set1")
 
        SecondFace = theNewLoad.GetSecondFace(errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get Face Set2")
 
        errCode = theNewLoad.ReplaceFacesThenAutoGenerateTouchingEdges(0, pDisp1, pDisp2)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to replace faces and find touching edges")
 
        Dim var() As Object = theNewLoad.GetEdgeList(errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get edge list")
 
        Dim varArray As Object() = {var(0)}
        errCode = theNewLoad.ReplaceFacesAndEdges(0, pDisp1, pDisp2, varArray)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to replace faces and edges")
 
        Dim varArray2 As Object() = {var(1)}
        errCode = theNewLoad.AddEdges(0, varArray2)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to add edges")
 
        errCode = theNewLoad.RemoveEdges(0, varArray)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to remove edges")
 
        errCode = theNewLoad.SetEdgeWeldType(3)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set edge weld type")
 
        errCode = theNewLoad.SetWeldOrientation(True)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set whether to show weld orientation")
 
        WeldOrientation = theNewLoad.IsWeldOrientation(errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get whether to show weld orientation")
 
        errCode = theNewLoad.SetInducedBendingMomentIncluded(True)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set whether induced bending moment is included")
 
        InducedBendingMomentIncluded = theNewLoad.IsInducedBendingMomentIncluded(errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get whether induced bending moment is included")
 
        CodeType = theNewLoad.GetCodeType(errCode)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get weld code")
 
        'American Standard weld sizing
        errCode = theNewLoad.SetCodeType(0)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set American Standard weld code")
 
        errCode = theNewLoad.SetWeldSizingSettingUS(4, 100.1, 4, 1, 1, True, 98, 0)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set American Standard weld sizing")
 
        errCode = theNewLoad.GetWeldSizingSettingUS(nElectrodeMaterial, dWeldStrength, nWeldStrengthUnit, nFOSOption, dFOS, bEstimatedWeldSize, dEstimatedWeldSize, nEstimatedWeldSizeUnit)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get American Standard weld sizing")
 
        'European weld sizing
        errCode = theNewLoad.SetCodeType(1)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set european weld code")
 
        errCode = theNewLoad.SetWeldSizingSettingEuro(1, 155.2, 4, 1, 1, True, 98, 0)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to set european weld sizing")
 
        errCode = theNewLoad.GetWeldSizingSettingEuro(NWeakMaterial, DUltimateTensileStrength, NTensileStrengthUnit, DCorrelationFactor, DPartialSafetyFactor, BIsEstimatedWeldSize, dEstimatedWeldSize, nEstimatedWeldSizeUnit)
        If errCode <> 0 Then ErrorMsg(SwApp, "Failed to get european weld sizing")
 
    End Sub
 
    Private Sub SelectByPID(ByVal PIDName As String, ByVal PIDCollection As Collection, ByRef varEntity As Object)
 
        Dim PID() As Byte
        Dim PIDVariant As Object
        Dim PIDString As String
        Dim i As Integer
 
        'Get the string from the collection
        PIDString = ""
        PIDString = PIDCollection.Item(PIDName)
 
        'Parse the string into an array
        PIDVariant = Split(PIDString, ",")
        ReDim PID(UBound(PIDVariant))
 
        'Change to a byte array
        For i = 0 To (UBound(PIDVariant) - 1)
            PID(i) = Convert.ToByte(PIDVariant(i))
        Next i
        varEntity = PID
 
    End Sub
 
    Public Function PIDInitializer() As Collection
 
        Dim PIDCollection As New Collection
 
        Dim selection1 As String
        Dim selection2 As String

        'Faces
        selection1 =         "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,6,0,0,0,4,2,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,0,"
selection1 = selection1 & "0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,45,0,0,0,80,132,43,72,1,0,0,0,255,255,1,0,16,0,109,111,84,111,112,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,12,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,255,255,1,0,19,0,109,111,66,111,116,116,111,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
selection1 = selection1 & ",Type=1"

        selection2 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,70,97,99,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,4,2,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,"
selection2 = selection2 & "0,0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,26,0,0,0,36,131,43,72,1,0,0,0,255,255,1,0,16,0,109,111,84,111,112,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,26,0,0,0,36,131,43,72,1,0,0,0,0,0,255,255,1,0,19,0,109,111,66,111,116,116,111,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,26,0,0,0,36,131,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
        selection2 = selection2 & ",Type=1"

        'Store constants in a collection.
        PIDCollection.Add selection1, "selection1"
        PIDCollection.Add selection2, "selection2"

        Dim selection4 As String

        'Edge
        selection4 = "233,35,0,0,3,0,0,0,255,254,255,0,0,0,0,0,255,255,1,0,11,0,109,111,69,100,103,101,82,101,102,95,99,1,0,0,0,0,0,0,0,5,0,0,0,4,3,0,0,0,0,0,0,125,195,148,37,173,73,178,84,125,195,148,37,173,73,178,84,0,0,255,255,1,0,23,0,109,111,70,114,111,109,83,107,116,69,110,116,83,117,114,102,73,100,82,101,112,95,99,0,0,255,255,1,0,6,0,109,111,70,82,95,99,255,255,1,0,13,0,109,111,69,120,116,79,98,106,101,99,116,95,99,255,255,1,0,17,0,109,111,67,83,116,114,105,110,103,72,97,110,100,108,101,95,99,255,254,255,78,67,0,58,0,92,0,80,0,114,0,111,0,103,0,114,0,97,0,109,0,32,0,70,0,105,0,108,0,101,0,115,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,32,0,67,0,111,0,114,0,112,0,92,0,83,0,79,0,76,0,73,0,68,0,87,0,79,0,82,0,75,0,83,0,92,0,115,0,97,0,109,0,112,0,108,0,101,0,115,0,92,0,116,0,117,0,116,0,111,0,114,0,105,0,97,0,108,0,92,0,97,0,112,0,105,0,92,0,116,0,106,0,111,0,105,0,110,0,116,0,46,0,115,0,108,0,100,0,112,0,114,0,116,0,9,128,255,254,255,6,116,0,106,0,111,0,105,0,110,0,116,0,2,"
        selection4 = selection4 & "0,0,239,130,43,72,255,254,255,0,255,254,255,0,0,176,178,110,16,0,0,0,0,0,0,0,0,0,0,0,0,255,254,255,7,68,0,101,0,102,0,97,0,117,0,108,0,116,0,0,0,0,0,0,0,0,0,176,178,110,16,26,0,0,0,36,131,43,72,1,0,0,0,0,0,255,255,1,0,21,0,109,111,76,101,102,116,84,114,105,109,69,100,103,101,73,100,82,101,112,95,99,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,1,0,0,0,12,128,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,1,0,0,0,12,128,0,0,5,128,8,0,46,0,0,0,139,132,43,72,3,128,0,0,5,128,8,0,45,0,0,0,80,132,43,72,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
        selection4 = selection4 & ",Type=1"

        'Store constants in a collection.
        PIDCollection.Add selection4, "selection4"
 
        PIDInitializer = PIDCollection
    End Function
 
    Private Sub ErrorMsg(ByVal SwApp As SldWorks, ByVal Message As String)
        SwApp.SendMsgToUser2(Message, 0, 0)
        SwApp.RecordLine("'*** WARNING - General")
        SwApp.RecordLine("'*** " & Message)
        SwApp.RecordLine("")
    End Sub
 
 
    Public swApp As SldWorks
 
 
End Class
 

 

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Create and Edit Edge Weld Connector Example (VB.NET)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2017 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.36