To access the property manager in the route subassembly, click 
.
Flatten Type
| Annotation |
Specifies simplified representations of the route as a flattened configuration and drawing. The lines are not true lengths, but the annotations on the route segments display the true length of the routed wire.
|
| Manufacture |
Specifies scaled representations of the route as a flattened configuration and drawing. These representations are made to scale within a region.
|
Flatten Options
| Display 3D connectors |
Displays the 3D models of the connectors in the flattened route.
|
| Use drawing connector blocks |
Displays 2D drawing blocks of the connectors in the drawing of the flattened route. No connectors appear in the flattened configuration of the model.
|
Drawing Options
Select tables and annotations to appear on the drawing. Click Open Table Template 
to browse for different templates.
| Electrical BOM |
Adds a bill of materials to the drawing. The default template is bom-standard.sldbomtbt.
|
| Cut list |
Adds a table called Circuit Summary to the drawing. The table lists cut lengths and connection information for each conductor. The default template is bom-circuit-summary.sldbomtbt.
|
| Connector table |
Adds a table for each connector with pin/cavity designations and the corresponding names of wires. The default template is connector-table.sldtbt.
|
| Auto balloons |
Balloons are added for each item in the bill of materials. |