On the Sketch toolbar, click the Spline flyout, and then select Equation Driven Curve or click Tools > Sketch Entities > Equation Driven Curve.

Under Equation Type, select Explicit or Parametric.

3D sketches support parametric equations only.

Under Equation, specify the curve equation where:

Y is a function of X (explicit equations).

x^3/"D1@Sketch5"

You can use any functions supported in the Equations dialog box. For example:

2*(x + 3*sin(x))

X, Y, and Z are functions of T (parametric equations). For example:

Let x be defined by: sin(t)

Let y be defined by: cos(t)

For t1 = 0 and t2 = pi, the result is a semi-circle. (Closed geometry is not allowed.)

Z is for 3D sketches only.

Under Parameters, specify the range of values for X (explicit equations) or T (parametric equations), where _{1} is the start point and _{2} is the end point (for example, X_{1} = 0 and X_{2} = 2*pi).

Click
to lock or unlock the start or end point location on the curve:

(locked): The start or end point is fixed.

(unlocked): You can drag the start or end point along the curve.

Click .

The curve defined by the equation appears in the sketch.

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

*Email:

Subject:

Feedback on Help Topics

Page:

Creating an Equation Driven Curve

*Comment:

*

I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.