- Hole Series Overview
You can use hole series to create a series of holes through the individual parts of an assembly.
- Creating a Hole Series
- Hole Position PropertyManager
Use the Hole Series PropertyManagers to create a hole series. You can create a new hole or use existing holes for the hole series. To dimension the hole series, dimension the sketch points on the starting face.
- Hole Series (First Part) PropertyManager
The First Part is the part whose face you selected. Enter parameters for the Hole Series.
- Hole Series (Middle Parts) PropertyManager
The Middle Parts are all the parts through which the Hole Series passes (between the first and last parts). If you add new components between the start and end components after you create the hole series, you can choose to include the new components in the hole series. You must edit the hole series to update it.
- Adding Middle Components to a Hole Series
- Hole Series (Last Part) PropertyManager
The Last Part is the last part through which the Hole Series passes. The Last Part contains the tap, or the bottom of the hole if it is a blind hole.
- Hole Series Smart Fasteners PropertyManager
You can insert a Smart Fastener into a hole series using this PropertyManager. If you size a hole series, the software automatically sizes related Smart Fasteners. If you modify the size of the hole series, the software adjusts the Smart Fastener.