Creating the Standard 3 View by the Standard Method To create the Standard 3 View by the standard method: In a drawing, click Standard 3 View (Drawing toolbar), or click Insert > Drawing View > Standard 3 View. The pointer changes to . Select the model in one of these ways: Select a model from Open documents in the Standard 3 View PropertyManager or browse to a model file and click . To add the views of a part, in a part window, click a face, or anywhere in the graphics area, or click the part name in the FeatureManager design tree. To add the views of an assembly, in an assembly window, click an empty region of the graphics area, or click the assembly name in the FeatureManager design tree. To add the views of an assembly component, in an assembly window, click a face on the part, or click the name of either an individual part or a subassembly in the FeatureManager design tree. In a drawing window, click a view that contains the desired part or assembly, either in the FeatureManager design tree or in the graphics area. Parent topicStandard 3 View Related tasks Creating a Standard 3 View When Starting a New Drawing Document Creating the Standard 3 View by the Drag and Drop Method Creating the Standard 3 View from a Hyperlink Standard 3 View PropertyManager