Hide Table of Contents

Get and Set User Preferences Example (VBA)

This sample code demonstrates how to get and set various system options and document properties.

'---------------------------------------------------------------------------
' Preconditions:
' 1.  Open a drawing document.
' 2.  Create a layer named test in the document.
' 3.  Open an Immediate window.
'
' Postconditions:
' 1. Observe the new settings in the Immediate window.
' 2. Maps the value returned by the GetUserPreferenceInteger method
'    to the corresponding enumerator member in the enumerator online help.
' 3. Click Tools > Options in SOLIDWORKS and verify the new settings.
'----------------------------------------------------------------------------

Dim swApp As Object

Dim Part As Object

Dim boolstatus As Boolean

Dim longstatus As Long, longwarnings As Long

Dim swTextFormat As SldWorks.TextFormat

Dim TextFormatObj As Object

Dim ModelDocExtension As ModelDocExtension

 

Sub main()

 

Set swApp = Application.SldWorks

Set Part = swApp.ActiveDoc

Set ModelDocExtension = Part.Extension

 

    'The following call demonstrates how to get and set a Tools > Options > System Options > General option

    'Custom property used as component description

    boolstatus = swApp.SetUserPreferenceStringValue(swUserPreferenceStringValue_e.swCustomPropertyUsedAsComponentDescription, "Status")

    Debug.Print "Tools > Options > System Options > General > Custom property used as component description: " & swApp.GetUserPreferenceStringValue(swUserPreferenceStringValue_e.swCustomPropertyUsedAsComponentDescription)

 

    'The following calls demonstrate how to get and set Tools > Options > System Options > View options

    'Reverse mouse wheel zoom direction

    swApp.SetUserPreferenceToggle swUserPreferenceToggle_e.swViewReverseWheelZoomDirection, True

    Debug.Print "Tools > Options > System Options > View > Reverse mouse wheel zoom direction: " & swApp.GetUserPreferenceToggle(swUserPreferenceToggle_e.swViewReverseWheelZoomDirection)

    

    'View rotation - Arrow keys

    boolstatus = swApp.SetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewRotationArrowKeys, 0.2268928027593)

    '1 radian = 180º/p = 57.295779513º or approximately 57.3º

    Debug.Print "Tools > Options > System Options > View > Arrow keys: " & swApp.GetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewRotationArrowKeys) * 57.3 'Convert to degrees

    

    'View rotation - Mouse speed

    boolstatus = swApp.SetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swViewRotationMouseSpeed, 56)

    Debug.Print "Tools > Options > System Options > View > Mouse speed: " & swApp.GetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swViewRotationMouseSpeed)

    

    'Transitions - View transition

    boolstatus = swApp.SetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewAnimationSpeed, 2.5)

    Debug.Print "Tools > Options > System Options > View > View transition: " & swApp.GetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewAnimationSpeed)

    

    'Transitions - Hide/show component

    boolstatus = swApp.SetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewTransitionHideShowComponent, 0.8000000119209)

    Debug.Print "Tools > Options > System Options > View > Hide/show component: " & swApp.GetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewTransitionHideShowComponent)

    

    'Transitions - Isolate

    boolstatus = swApp.SetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewTransitionIsolate, 1.222222208977)

    Debug.Print "Tools > Options > System Options > View > Isolate: " & swApp.GetUserPreferenceDoubleValue(swUserPreferenceDoubleValue_e.swViewTransitionIsolate)

 

    'The following calls demonstrate how to get and set the Tools > Options > Document Properties > Drafting Standard option.  

    'Map the value returned by the GetUserPreferenceInteger method to the corresponding enumerator member in the enumerator online help

    'Overall drafting standard

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingDimensionStandard, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swDetailingStandard_e.swDetailingStandardISO)

    Dim sText As String

    sText = "Tools > Options > Document Properties > Drafting Standard > Overall drafting standard is "

    Select Case ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingDimensionStandard, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

        Case 1

            Debug.Print sText & "ANSI"

        Case 2

            Debug.Print sText & "ISO"

        Case 3

            Debug.Print sText & "DIN"

        Case 4

            Debug.Print sText & "JIS"

        Case 5

            Debug.Print sText & "BS"

        Case 6

            Debug.Print sText & "GOST"

        Case 7

            Debug.Print sText & "GB"

        Case 8

            Debug.Print sText & "User Defined"

      End Select

        

     'The following API calls demonstrate how to get and set Tools > Options > Document Properties > Annotations > Balloons options

     'Map the value returned by the GetUserPreferenceInteger method to the corresponding enumerator member in the enumerator online help

    'Leader style - Leader Thickness

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBalloonLeaderLineThickness, 0, swLineWeights_e.swLW_NUMBER)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Leader Thickness: " & ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBalloonLeaderLineThickness, 0)

    

    'Leader style - Custom leader thickness

    boolstatus = ModelDocExtension.SetUserPreferenceDouble(swUserPreferenceDoubleValue_e.swDetailingBalloonLeaderLineThicknessCustom, 0, 0.00028)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Custom Leader Thickness: " & ModelDocExtension.GetUserPreferenceDouble(swUserPreferenceDoubleValue_e.swDetailingBalloonLeaderLineThicknessCustom, 0)

    

    'Frame style - Frame Thickness

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBalloonFrameLineThickness, 0, swLineWeights_e.swLW_NUMBER)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Frame Thickness: " & ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBalloonFrameLineThickness, 0)

    

    'Frame style - Custom frame thickness

    boolstatus = ModelDocExtension.SetUserPreferenceDouble(swUserPreferenceDoubleValue_e.swDetailingBalloonFrameLineThicknessCustom, 0, 0.00028)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Custom Frame Thickness: " & ModelDocExtension.GetUserPreferenceDouble(swUserPreferenceDoubleValue_e.swDetailingBalloonFrameLineThicknessCustom, 0)

    

    'Text - Upper - Custom property

    boolstatus = ModelDocExtension.SetUserPreferenceString(swUserPreferenceStringValue_e.swDetailingBOMUpperCustomProperty, 0, "Source")

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Text Upper Custom property: " & ModelDocExtension.GetUserPreferenceString(swUserPreferenceStringValue_e.swDetailingBOMUpperCustomProperty, 0)

    

    'Single balloon - Style

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMBalloonStyle, 0, swBalloonStyle_e.swBS_Triangle)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Single balloon - Style: " & ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMBalloonStyle, 0)

    

    'Single balloon - Size

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMBalloonFit, 0, swBalloonFit_e.swBF_3Chars)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Single balloon - Size: " & ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMBalloonFit, 0)

    

    'Stacked balloons - Style

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMStackedBalloonStyle, 0, swBalloonStyle_e.swBS_Triangle)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Stacked balloons - Style: " & ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMStackedBalloonStyle, 0)

    

    'Stacked balloons - Size

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMStackedBalloonFit, 0, swBalloonFit_e.swBF_3Chars)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Stacked balloons - Size: " & ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingBOMStackedBalloonFit, 0)

    

    'Auto balloon layout

    boolstatus = ModelDocExtension.SetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingAutoBalloonLayout, 0, swBalloonLayoutType_e.swDetailingBalloonLayout_Right)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Auto balloon layout: " & ModelDocExtension.GetUserPreferenceInteger(swUserPreferenceIntegerValue_e.swDetailingAutoBalloonLayout, 0)

    

    'Leader display - Use document leader length

    boolstatus = ModelDocExtension.SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingBalloonUseDocBentLeaderLength, 0, True)

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Leader display - Use document leader length: " & ModelDocExtension.GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingBalloonUseDocBentLeaderLength, 0)

    

    'Layer

    boolstatus = ModelDocExtension.SetUserPreferenceString(swUserPreferenceStringValue_e.swDetailingLayer, swUserPreferenceOption_e.swDetailingBalloon, "test")

    Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Layer: " & ModelDocExtension.GetUserPreferenceString(swUserPreferenceStringValue_e.swDetailingLayer, swUserPreferenceOption_e.swDetailingBalloon)

    

    'Font...

        Set TextFormatObj = ModelDocExtension.GetUserPreferenceTextFormat(swUserPreferenceTextFormat_e.swDetailingBalloonTextFormat, 0)

        Set swTextFormat = TextFormatObj

        

        swTextFormat.Italic = True

        swTextFormat.Bold = True

       

        boolstatus = ModelDocExtension.SetUserPreferenceTextFormat(swUserPreferenceTextFormat_e.swDetailingBalloonTextFormat, 0, swTextFormat)

        Debug.Print "Tools > Options > Document Properties > Annotations > Balloons > Font is italic and bold: " & boolstatus

End Sub



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Get and Set User Preferences Example (VBA)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2019 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.