You can use this dialog box to view and edit connection point parameters.
The software highlights the CPoint or ACPoint in the graphics area and FeatureManager design
tree when you select or edit any parameter.
To access this dialog box:
- Open a part that has connection points or an assembly that has
assembly connection points.
- In the FeatureManager design tree, right-click CPoint and click View
and Edit Connection Point Parameters.
CPoint
Name |
Displays the connection point
name. |
Pin
Number/Port ID |
Displays the pin number or port
number, which you can edit. |
Stub
Length |
Displays the stub length, which
you define when you create connection points. You can edit the stub
length. |
Reverse
Direction |
Reverses the direction of the
route. |
For assembly connection points, you can edit only the Pin Number/Port ID.