Review Capabilities

You can create walk-throughs in Large Design Review just as you do in resolved mode.

Click Add Walk-through or View > Lights and Cameras > Add Walk-through. Walk-throughs can be played back in both Large Design Review and resolved modes, regardless of which mode they were created in.

You can measure the distance between entities in Large Design Review.

Click Measure or Tools > Evaluate > Measure. When you select two entities (vertices, edges, or faces) the software reports the approximate distance between them.

You can create section views in Large Design Review.

Click Section View or View > Display > Section View . For section planes, you can select one or more of the three standard planes in the PropertyManager, or any planar face in the graphics area. You can cap the ends of the section view.

You can use Isolate to focus on selected components.

Select one or more components, and then right-click and click Isolate.

In Large Design Review mode, you can take snapshots of locations that you want to return to.

Click Take Snapshot (View toolbar) or View > Lights and Cameras > Take Snapshot, or press Alt + Spacebar.

You can view snapshots in resolved, lightweight, and Large Design Review modes, regardless of the mode they were created in.

You can save an assembly in Large Design Review only when you create or change walk-throughs or snapshots.

Click Save (Standard toolbar) or File > Save.