 |
Plane, Axis or Coordinate System |
Select a reference plane or a reference axis to plot displacement.
|
| |
Show PSD value |
Available only for random vibration studies. When checked, the PSD values are shown for a particular solution step. Otherwise, the RMS values across the whole frequency range are shown.
|
| |
Show as vector plot |
Generates a vector plot where a vector is plotted at each node to show the magnitude and direction of the selected component. You can control the size and density of the vectors in a vector plot using the Vector Plot Options PropertyManager. Available for directional displacement components only.
|
| |
Render the thickness for shells (slower) |
Displays the displacement results on shell bodies using a 3D representation of the shells. For each node, one value is shown across the shell thickness. The shell body is displayed with the thickness value defined in the Shell Definition PropertyManager. The shell thickness orientation is displayed with relation to the midsurface of the shell as defined by the offset value in the Shell Definition PropertyManager.
|
| |
Show plot only on selected entities |
Generates plots only for the selected entities. |
 |
Select faces for the plot |
Select the faces to view results. |
 |
Select bodies for the plot |
Select the bodies to view results. |
| |
Display symmetric results |
Available for models with symmetry restraints or cyclic symmetry.
Select to view the displacement values for the whole model. The results are mirrored about the planes of symmetry for models where you analyze
half, a quarter, or one-eighth of the actual geometry.
For cyclic symmetry, results are
repeated cyclically about the defined axis of revolution.
|
| |
Render beam profile (slower) |
Available only for studies with beams. Displays displacement plot on actual beam geometry as opposed to cylinders.
|