Solid Mesh Commands Once you create a solid mesh, several commands appear under the Solid Mesh node. A green check on the Solid Mesh node indicates that a solid mesh exists. Right-click Solid Mesh to access these commands. Create Mesh Creates a surface mesh Details Opens a panel with a detailed report about the mesh. Hide Mesh Model / Show Mesh Model Switches the visibility of the mesh model in the graphics area. You can also access this command from Mesh Model in the Plastics CommandManager. Solid Mesh View Creates cross sections of a solid mesh to better visualize internal elements, and provides access to mesh editing tools. Warp Boundary Provides sufficient restraints to prevent rigid body motion for warp calculations. Nominal Wall Thickness Advisor Provides feedback on the thickness variations within the part cavity. Contents Solid Mesh View - Section Clipping PropertyManager With the Solid Mesh View PropertyManager, you can create cross sections of a solid mesh to better visualize internal elements and to access mesh editing tools. Solid Mesh View - Quality PropertyManager With the Solid Mesh View - Quality PropertyManager, you can create mesh quality plots, and extract the surface mesh. Warp Boundary PropertyManager The Warp Boundary PropertyManager provides options to prevent rigid body motion for warp calculations. Parent topicSolid Mesh Mesh Details Report Nominal Wall Thickness PropertyManager
node. A green check on the Solid Mesh node indicates that a solid mesh exists. to access these commands.