You can view layer properties from the Layer
Properties panel.
To open the Layer Properties panel for a layer:
From the tree view, expand Layers 
, right-click a layer, and click Properties.
| Name |
Specifies the name of the layer. |
| Number |
Specifies an integer label for the layer. |
| Material |
Specifies the material of the layer. |
| Type |
Specifies the type of layer:
|
Conductor 
|
|
|
Dielectric 
|
|
|
| Start
height |
Specifies the height of the bottom of the layer
relative to the bottom of the board. |
| End
height |
Specifies the height of the top of the layer
relative to the bottom of the board. The end height of one layer
is the same as the start height of the next layer
|
| Thickness
(mm) |
Specifies the layer thickness, which you can
control with the End height option. |
The IDF 2.0 and IDF 3.0 file formats support only single-layer boards.
The IDF 4.0 and later file formats support multilayer boards.