| Reduced the default number of isotherm plots from
10 to 5 to reduce visual clustering of the curves. |
Reduced the default number of isobars from 10 to
6. The 6 isobars display the pressure values at: 0, 50, 100, 150,
200, and 250 MPa. |
| Increased the number of temperature datasets for
generating viscosity curves to 5. |
Increased the number of pressure datasets for
generating PVT curves to 4. |
| Plot markers are removed. The software generates
the plots from the Cross-WLF Viscosity model coefficients. |
Plot markers are removed. The software generates
the plots from the Modified Tait model coefficients. |
| The default range of the shear rate values on the
X-axis is modified to be 1 to 100,000 (the previous range was 0.0001
to 10,000). This range better fits the shear rates during typical
injection molding cycles. |
|