This is a summary of the features, sketches, and dimensions that you must use in the components of pipe and tube route assemblies.
Pipe and Tube Parts
- Pipe section
- Tube section
- A configuration-specific property named $PRP@Pipe Identifier (value must be unique for each configuration).
- A configuration-specific property named $PRP@Specification (recommended).
- A design table with a configuration for each size of raw stock that you use. You must include the following parameters in the table:
| InnerDiameter@PipeSketch |
| OuterDiameter@PipeSketch |
| NominalDiameter@FilterSketch |
| $PRP@Pipe Identifier |
Do not include Length@Extrusion in the design table.
All types of fittings
In any fitting that has multiple configurations, Specification@Cpointn is recommended for each connection point (include as a design table parameter).
Elbow Parts
- Required geometry
- A Connection Point at each end of the elbow, where you want the pipe or tube to be cut.
- A design table with a configuration for each size of elbow that you use.
| BendAngle@ElbowArc |
| BendRadius@ElbowArc |
| Diameter@Cpointn (for each connection point) |
Flanges
- Required geometry
- One Connection Point.
- One Route Point (optional).
Reducers
- Required geometry
- One Connection Point at each end.
Other Fittings (such as tees and crosses)
- One Connection Point at each port.
- One Route Point at the intersection of the branches.