![](jdz1555448961205.image) |
General |
Creates a cooling channel by entering the diameters at
the two end nodes connected by line elements. |
![](sxh1450472369881.image) |
Schematic representation of a cooling channel layout. 1: Input Node, 2: Output Node
|
![](wxm1555449010973.image) |
Baffle |
Creates a cooling channel by entering one diameter for
the two end nodes. The bottom node connects to the node of a line
element, and the top node is isolated. |
![](mwn1450472370438.image) |
Schematic representation of a Baffle cooling
channel. 1: Top Node, 2: Baffle, 3: Bottom
Node, 4: Channel Element
|
![](mol1555449310884.image) |
Bubbler |
Creates a cooling channel by entering two diameters
(tube cross-section) for the two end nodes. The bottom node connects
to the line element and the top node is isolated. |
![](hsc1450472371097.image) |
Schematic representation of a Bubbler cooling
channel. 1: Top Node, 2: Bubbler, 3: Bottom
Node, and 4: Channel Element
|
![](hyn1450373129958.image) |
Number of Elements |
Specifies the number of meshing elements in the
streamwise direction of each line segment of the sketch. |
|
Assign |
Applies the current design parameters to the selected
line segments and updates the graphics area accordingly. |
|
Delete |
Removes the current selections. |