-References

Use the -References command to attach external drawings as References in the current drawing and manage the links to them.

It is the command window variant of the References command.

To attach external drawings as References:

1. Type -References at the command prompt.
2. Specify an option:
   • Attach. Creates a link to a drawing and references it in the current drawing. The attached drawing is the most recently saved version. The Attach option includes the external drawing.
   • Overlay. Creates a link to a drawing and references it in the current drawing. The Overlay option does not include the external drawing.
3. In the dialog box, select the drawing you want to attach to the current drawing and click Open.
4. Set the position for the referenced drawing:
   • Angle: Sets the rotation angle and rotates the drawing upon placement.
   • PAngle: Sets the preview rotation angle.
   • PScale, PX, PY, PZ: Sets the preview scale.
   • Reference point: Lets you enter the base point for the Reference placement.
   • Uniform scale, X, Y, Z: Sets the scale for the X, Y, and Z axes.

     The referenced drawing displays where you placed it.

To list References:

1. Type -References.
2. Specify the ? option.
3. Specify the * option.

   The currently referenced drawings display with corresponding reference types (Attach or Overlay), paths, and file names.

To update References:

1. Type -References.
2. Specify the Reload option.

   Drawings that contain referenced drawings are displayed in their current states. When working on a project in a workgroup, you might need to update References while you are work on a drawing.

3. Type the name of the Reference to reload.

   The program reloads the specified drawing in the form in which it was most recently saved.

To unload References:

1. Type -References.
2. Type Unload.
3. Type the name of the Reference to unload.

   The Reference you unloaded is no longer visible in the drawing, but the link to the file is maintained. To redisplay an unloaded Reference, specify the Reload option.

To reset the path to a Reference:

Occasionally, the location of an referenced drawing changes or a referenced file is renamed. Also, embedded reference drawings sent in emails need their paths updated. The Path option reestablishes the path to the referenced drawing, reattaches a renamed referenced file, or replaces a referenced drawing by another file.

1. Type -References.
2. Specify the Path option.
3. Type the name of the Reference whose path needs updating.

   The drawing's current path displays.

4. Type the new path to the drawing.

To bind a Reference permanently to the drawing:

Specify the Bind option to make a referenced drawing a permanent part of a drawing, for example, if you want to email a drawing or archive a finalized drawing. Bind the referenced drawing to the current drawing to avoid including an assembly of drawings within an archive or email.

1. Type -References.
2. Specify the Bind option.

   Note: The behavior of the Bind option is dependent from the SetRefBindMode command variable.

   Note: The behavior of the Bind option is dependent from the BINDTYPE system variable.

3. Type the name of the Reference to bind to the current drawing.

To detach a Reference:

Specify the Detach option to remove referenced drawings from the current drawing, which erases the dependent symbols such as Layer, LineStyle, and Block definitions from the drawing file.

1. Type -References.
2. Specify the Detach option.
3. Type the names of References to detach from the current drawing.

  Note: Although you can erase References with the Delete command, specify the Detach option to remove the dependent symbols from the drawing file, as well.

Access

Command: -References