On the
Extraction page, you can specify project extraction
settings.
To access this dialog box, click Home (ribbon) and click .
General Characteristic Extraction Settings (OCR &
SmartExtract)
These settings apply to OCR and SmartExtract tools.
Characteristic Info
Create
For Each Instance |
Creates a separate instance for
characteristics with quantities of more than one. |
SmartExtract Settings
These settings apply to the SmartExtract tool only.
Dimensions
Include |
Extracts dimensions from 3D models
and 2D drawings. You can extract Basic, Feature, or Reference dimensions. |
Inspection Only |
Extracts inspection dimensions
only. Does not extract basic or reference dimensions. |
Auto-explode hole callouts |
|
Notes
Include |
Extracts notes from 3D models and
2D drawings. You can extract Datums, Datum
Targets, and Flag
Notes. If you select Flag Notes, you can also select
Correlate Flag Notes
and Extract full Flag Note text
(supported for CATIA data only).
|
Auto-explode multi-line notes |
|
GDTs
Include |
Extracts geometric dimensioning
and tolerancing (GDT) feature control frames from 3D models and 2D
drawings. |
Welds
Include |
Extracts weld symbols from 3D
models and 2D drawings. |
Surface Finishes
Include |
Extracts surface finish symbols
from 3D models and 2D drawings. |
Geometry Options
Load
Invisible Components |
|