Accept |
|
AQL |
|
Balloon Locations |
Lists all locations for balloons
associated with a characteristic when you turn a balloon on. |
Balloon Number |
Balloon number listed in the
drawing. This may be different from a
characteristic number. Characteristic numbers must be unique
identifiers, whereas balloon numbers can be
duplicates.
|
Basic |
Specifies a basic
dimension. |
Characteristic Number |
Unique identifier generated for
each dimension by SOLIDWORKS Inspection. |
Classification |
Characteristic designator (such as Critical, Major,
Key) |
Comments |
Free text column where you can
enter characteristic comments. |
Custom Fields 1-10 |
User-defined customized
fields. |
File
Path |
File path location of the
original drawing. |
Filename |
File name of the original
drawing. |
Fit
Grade |
|
Fit
Type |
|
For
Reference |
Specifies a reference
dimension. |
Full
Balloon Location |
The
letters and numbers along the border of a drawing sheet format that
signify zones on the sheet. For example, if a balloon location is
B3, you can locate the balloon in the quadrant on the sheet
where a line intersects row B and column
3.
|
Full
Specification |
|
Inspection Method |
Inspection method used to inspect
the attribute. |
Key |
Specifies a key
characteristic. |
Lower
Limit |
Absolute lower limit of the
dimension. Calculated by subtracting the
dimension's lower tolerance from the dimension's nominal
value.
|
Minus
Tolerance |
Dimension's lower tolerance
value. |
Nominal Value (GDT Font) |
|
Nominal Value (Text Only) |
Characteristic's nominal value. This is also the numeric value for geometric
dimensioning and tolerancing symbols (GDT), weld and surface
finish symbols, and notes.
|
Nonconformance Number |
|
Operation |
Characteristic's inspection
process. |
Plus
Tolerance |
Dimension's upper tolerance
value. |
Plus
Tolerance/Minus Tolerance |
|
Quantity |
Characteristic's quantity. For example, if there are 3X (3 instances) of
the characteristic to inspect.
|
Reject |
|
Requirement |
|
Sample Size |
|
Sheet
+ Zone |
Sheet number and zone where
balloons are located. |
Sheet/View/Capture Name |
|
Specification (image) |
Dimension's nominal value using
GDT font to represent GDT and other symbols. |
Sub-Type |
Characteristic's sub-type (such
as length, perpendicularity, position, depth, or diameter). |
Type |
Characteristic's type (such as
Dimension or Note). |
Units |
Units for the dimension's nominal
and tolerance values. |
Upper
Limit |
Absolute upper limit of the
dimension. Calculated by adding the
dimension's upper tolerance to the dimension's nominal
value.
|
Zone |
Characteristic's grid
location. |