Layer Group Properties

You can view aggregated layer group properties from the Layer Properties panel.

To open the Layer Properties panel for all layers:

From the tree view, right-click Layers and click Properties.
To view the properties if an individual layer, right-click the layer and click Properties.
Name  
Number Specifies a integer label for the layer.
Material  
Type Specifies the type of layer:

Conductor apri5copperconductorlayer.gif

Dielectric apr5dieletriclayericon.gif

Start Height Specifies the height of the bottom of the layer relative to the bottom of the board.
End Height Specifies the height of the top of the layer relative to the bottom of the board.
The end height of one layer is the same as the start height of the next layer
Thickness (mm) Specifies the thickness of the layer.
The sum of the layer thicknesses defines the board thickness.