Adding a Fitting from the Routing Menu To add a fitting from the Routing menu: While editing the 3D sketch, click Add Fitting (Routing Tools toolbar) or Tools > Routing > Routing Tools > Add Fitting. Select the fitting from the dialog box, then click Open. The pointer changes to . Align the fitting:Right-click to view the possible alignments of the fitting. When the alignment is correct, left-click. Select the desired configuration, and click OK. Parent topicAdding Fittings and Components to Routes Adding a Fitting from the Design Library Changing the Alignment of a Fitting Controling the Angular Orientation of a Fitting Using Add to Route Adding Isogen Data to Fittings