Adds members between two primary
members.
To open the
Secondary
Member
PropertyManager:
Click
.
For
new
structure
systems,
you must create primary members before you can add secondary members.
Secondary Member Type
Support
Plane
Member |
Creates a member on a plane between two primary
members. Select a plane and two primary members. |
Between
Points
Member |
Creates a member between two primary members
based on the position of the end points. You can refine the location
by specifying a distance from the selected primary members. |
Up to
Members |
- Point Member pair.
Creates a member between a point and member.
- From Point. Creates
multiple members between a point and members.
|
Support
Plane Member
Member
Pair |
Link
creates a chain of member pairs. The end point of one member pair is
used as the beginning of the next member pair in the chain. |
Member
Parameter |
Specifies the planes or planar surfaces that
intersect the members pairs |
Align
Member |
Zooms to the profile of the structural member
and shifts the profile to align pierce points with the structural
member sketch segment. |
Start/End
Extend |
Extends members from a starting location to an
end point. |
Split
Member |
Divides a member into multiple separate members
based on a Reference or
Dimension. Reference. Splits members with an intersecting
face, reference plane, or another member.
Dimension. Defines
a split by Length and
Number of
Instances.
|
Between
Points
Member
Member Pair |
Displays
the member pair between which the new member is created. |
Member Parameter |
.
Adds
the secondary member. .
Deletes
the secondary member.
|
Offset |
Lets
you select the Distance or Length Ratio.
Changes
the offset from
the
first
member and from the second member using
the
arrows.
|
Align
Member |
Performs the same function of
Align
Member in
Support
Plane Member. |
Start/End Extend |
Performs the same function of
Start/End Extend in
Support
Plane Member. |
Split Member |
Performs the same function of
Split Member in
Support
Plane Member. |
Up to
Members
Member Point Parameters |
- Point-Member pair. Creates a member
between a point and a member.
- From
point. Creates multiple members between
a point and members.
|
Offset |
Select Distance or Length Ratio. |
Member |
Displays the offset. Change
the offset using the arrows. |
Start/End Extend |
Performs the same function of
Start/End Extend in
Support
Plane Member. |
Split Member |
Performs the same function of
Split Member in
Support
Plane Member. |