Two Member PropertyManager

To open the Two Member PropertyManager:

  1. In the FeatureManager design tree, expand Corner Management.
  2. Right-click Two Member Corner Group and select Edit Feature.

In the graphics area, each green handle on the model represents a corner group. When you select a blue handle, the corner group highlights in the PropertyManager.

Corner Groups

Lists corner groups to which you can apply trim treatments. You cannot add or remove corners from a group.

Corner Treatment

Displays the options related to Corner Treatment.

Miter Trim Trim the members at a 45 degree angle.
Planar Trim Cuts the intersecting member with a plane.
First Contact planar trim Planar Trim Type Option. Trims the member when it first comes into contact with adjacent faces.
Full Contact planar trim Planar Trim Type Option. Trims the member flush with adjacent faces.
Body Trim Conforms the intersecting member to the shape of adjacent faces by adding or removing material.
    Select Up or Down arrow to assign trim tool member.
  Miter trim plane point Selects a point from the graphics area to create the miter trim through the selected point.
  Gap Adds a gap between members.
  Allow Extension Extends the structural members.