Managing revision attributes
Revision attributes are displayed in the modification grid of the title
blocks and they are managed in the title
block editor.
|
Menu: Edit title block
> Modify revision index
Contextual menu of a revision attribute: Modify
revision index |
Each revision attribute has an index number that can be positive (Absolute mode) or negative (Relative mode).
Marking mode
Relative: The index number is
calculated from the current revision. The index number "-0"
displays the current revision index. The "-1" displays the previous
revision index.
For example in 0AB mode, if
the current revision is "E = sixth index", the "-2"
index number propagates the revision index "C = fourth index"
(6-2=4).
A configuration setting
allows you to select the position of revision index:
- On the bottom of the modification grid of the drawing
- According to the position of the revision attributes
Absolute: The index number corresponds
to the revision index. The index number "0" corresponds to the
first revision index, the index number "1" corresponds to the
second revision index. To display a revision index in the drawing, you
must have its corresponding attribute inserted into the modification grid
of the title block.
Index: In Absolute
mode, it displays only negative values. In Relative
mode, it displays positive values. The value corresponds to the index
number you want, according to the selected mode.