Renumber wires
![](Screenshot/idi_wire_number_update-32.png)
|
Menu: Process > Renumber
wires |
This command can be applied to all wires of the electrical project,
depending on user defined options.
Selection
Whole project: Renumbers all
of the electrical project wires.
Current book: Renumbers only
the wires in the current book (the book associated with the current scheme).
Current folder: Renumbers only
the wires in the current folder (the folder associated with the current
scheme).
Current scheme: Renumbers only
the wires in the current scheme.
Wires selected in the scheme:
Renumbers only the wires selected in the scheme.
Choose schemes: Opens the scheme
selector to select schemes to process. Only wires within these schemes
will be renumbered.
Number wires
Remove wire numbers: Removes
existing wire numbers. Performs a new numbering operation to display the
numbers again. You must check the Recalculate
manual numbers box to recalculate all numbering.
Number new wires and recalculate existing
wire marks: Numbers new wires and renumber wires with existing
numbers, for example when numbering parameters have been changed. The
counter value is not affected by this renumbering unless the formula has
been changed to specifically affect it.
Recalculate the wire numbers:
Recalculates all wire numbers, except for numbers that have been modified
manually. You must check the Recalculate
manual numbers box to recalculate all numbering.
Wire style management: This
button allows you to open the Wire style
management to edit
the wire styles.